Power Management - Orient BTP-R880NP User Manual

9. Power Management

The power management of BTP-R880NP has four operation modes: Ready, Active, Sleep, Off.
1. Printer will enter into Ready mode after powering on printer or completing printing job.
2. Printer will enter into Sleep mode if there is not any printing job for 5 minutes in Ready mode.
3. Printer will awake automatically and enter into Active mode when printing job comes, and will
enter into Ready mode again after completing printing job.
Relating Parameter of power management is as below: Maximum Default Delay Times < 5min
Because the Maximum Default Delay Times is less than 5 minutes, BTP-R880NP does not open the
port of changing this time to end user.
- 23 -
BTP-R880NP User's Manual