Paper Near End Adjustment - Orient BTP-R880NP User Manual

Confirm that the paper is rolled tightly on the paper roll, otherwise, paper jam or other fault may occur.

The paper roll should be placed straight in the paper compartment and not at an angle. The paper roll

should be able to move freely.

4.8 Paper near end adjustment

4.8.1 Paper near end position adjustment
BTP-R880NP supports printing both in horizontal and vertical positions. Users can detect the remaining
paper in the horizontal and vertical position by adjusting the paper near end sensor. The default printer
setting is for horizontal printing and the paper near end sensor is at the bottom of the paper
compartment.
To change the paper near end sensor position from horizontal to vertical: First, press the plastic release
button in position 1 along the direction of the arrow. Then rotate thumbwheel in the direction shown. The
paper near end sensor will start to rotate. When the release button rotates to position 2, the change
from horizontal to vertical is complete.
Paper guide in the slot 3&4:
- 11 -
BTP-R880NP User's Manual
57 ±0.5mm