7
Balance wheel
.03
Fig. 7 - 03
7
Sewing foot retracting lever
.04
Fig. 7 - 04
1
2
The needle bar is adjusted manually by
turning the balance wheel 1 in the
direction of the arrow.
If the stop button for stitch length
adjustment is pressed at the same time,
by turning balance wheel 1 the stitch
length is altered, see also Chapter 7.06
Stop button for stitch length
adjustment and Chapter 9.03 Adjusting
the stitch length.
1
After pressing lever 1, the sewing foot 2
can be retracted.
Control elements
Before retracing the sewing
foot, raise the needle bar to its
highest position by turning the
balance wheel.
7 - 2