Denon AVR-1705 Operating Instructions Manual page 27

DSP surround simulation
• To operate the surround mode and surround parameters from the remote control unit.
1
Select the surround mode for the input channel.
(Remote control unit)
The surround mode switches in the following
order each time the DSP SIMULATION button is
pressed:
MONO MOVIE ROCK ARENA
MATRIX VIDEO GAME JAZZ CLUB
2
To enter the surround parameter setting mode,
press the SURROUND PARAMETER button.
• The surround parameter switches in the
following order each time the SURROUND
PARAMETER button is pressed for the
different surround modes.
• MONO MOVIE
• ROCK ARENA
• JAZZ CLUB
• VIDEO GAME
(Remote control unit)
SURROUND BACK
If you do want the bass and trable to be adjusted, turn off the tone defeat mode.
1
2
4
3 3
• MATRIX • VIRTUAL
ROOM SIZE DELAY TONE DEFEAT
EFFECT LEVEL TONE DEFEAT
TONE DEFEAT SURROUND BACK
DEFAULT
DEFAULT
3
Set the various surround parameters.
• ROOM SIZE setting
ROOM SIZE MED
SMALL MED-S MED
or
• EFFECT LEVEL setting
EFFECT LEVEL 10
1 10
or
• DELAY TIME setting
DELAY
0ms 30ms
or
• D.COMP. setting
D.COMP. OFF
OFF LOW
or
NOTE:
• This parameter is displayed during DOLBY
DIGITAL playback.
DEFAULT
4
(Remote control unit)
NOTE:
• When making parameter settings, the display will return to the regular condition several seconds after the
last button was pressed and the setting will be completed.
• LFE setting
MED-L LARGE -10dB
or
NOTE:
• This parameter is displayed during DOLBY
DIGITAL and DTS playback.
15
• TONE DEFEAT setting
or
ON
30ms
110ms
• SURROUND BACK SPEAKER setting
or
ON
MID HIGH
• DEFAULT setting
or
YES
Select "Yes" to reset to the factory defaults.
Press the ENTER button to finish surround parameter mode.
ENGLISH
LFE 0dB
-5dB 0dB
or or
TONE DEF. ON
OFF
or or
SB : ON
OFF
or or
DEFAULT Y/N
NO
or or
27