Step 2: Mount The Nuvi - Garmin nuvi 805 series Quick Start Manual

Step 2: Mount the nuvi
1. Plug the vehicle power cable into the
power connector on the right side of the
cradle.
Power
cable
Microphone
jack
2. Snap the cradle
Suction cup
onto the suction
mount
cup arm.
3. Clean and dry
your windshield
and the suction
cup with a lint-free cloth. Remove the
clear plastic from the suction cup. Place
the suction cup on the windshield.
4. Flip the lever back, toward the
windshield.
5. Fit the bottom of your
nOvi into the cradle.
6. Tilt the nOvi back until it
snaps into place.
Step 1: Install the nuvi
Battery
1. Locate the rectangular lithium-ion battery
that came in the product box.
2. Slide the battery cover off the back of the
nOvi.
3. Locate the metal contacts on the end of
the lithium-ion battery.
4. Insert the battery so the metal contacts
on the battery match up with the metal
contacts inside the battery compartment.
Ways to Charge Your nuvi
• Use the vehicle power cable.
• Use the USB cable.
• Use an optional AC adapter cable.
5. Press the battery down into place.
6. Slide the battery cover back on until it
clicks into place.
3