Pioneer DVR-543H-S Service Manual page 97

5
QQ
3. Diagnosis procedures 3 7 63 1515 0
1
Display the menu on the screen.
The menu indicated below is displayed when the diagnostic program is started. To enter each mode, press the
corresponding key "1"-"4" on the remote control unit for servicing.
2
Check the HDD information.
Press the "1" key on the remote control unit for servicing. Check the following data:
Model: Is the correct model name of the HDD displayed?
Recog. No: Is a positive value displayed?
SMART threshold: Is "not exceeded" displayed?
TE
L 13942296513
To return to the menu screen, press the "Clear" key.
www
.
5
http://www.xiaoyu163.com
6
x ao u163
y
i
6
http://www.xiaoyu163.com
7
2 9
8
Tests to be executed
1 HDD Information:
Check of the HDD information
2 S.M.A.R.T. DST:
Executing a simplified test or a reading test of all data
3 HDD R/W Check:
Executing a writing/reading test of all data. All data on the
HDD will be erased if this test is executed.
Note: "2. S.M.A.R.T. Attribute . . ." is not to be used.
Q Q
Detailed description
3 6 7 1 3 1 5
1 Model:
For the correct model name, refer to the display of the unit.
2 Recog. No:
Positive value: The HDD has been authenticated.
Negative value: The HDD has not been authenticated.
3 SMART threshold:
exceeded: The HDD has come to the end or near the end of
its service life.
not exceeded: The HDD has not reached the end of its
service life.
co
.
DVR-640H-S
7
8
9 4 2 8
0 5 8 2 9 9 4 2 8
m
9 9
A
B
C
9 9
D
E
F
97
8