Wiring - Montigo B34DV Installation, Operation & Maintenance Manual

Wiring

OPTIONAL
BATTERY
PACK
1.5V AA type
1.5V AA type
1.5V AA type
1.5V AA type
Wiring for the optional Fan Kit
All B-Series DV-2 fireplaces may be equipped with optional fan
kits for circulating heat into the living space.
Installations in Canada which employ the fans must be
electrically grounded in accordance with CSA C22.1 Canadian
Electrical Code Part 1 and/or Local Codes.
Installations in the USA which employ the fans must be
grounded in accordance with local codes or, in the absence of local
codes, with the National Electrical Code, ANSI/NFPA 70-1987.
For more information see the Fan Kit Installation Guide
included with the fan kit.
NOTE: If any of the original wire supplied with the appliance is replaced,
it must be replaced with the same type, or its equivalent.
Part No. XG0160 - 151125
Installation
SPARK
RED
BLACK
SENSOR
TO ON/OFF WHITE
BLACK
WALL SWITCH
BLUE
WHITE
OPTIONAL CPI/IPI SWITCH
YELLOW/GREEN
ORANGE
GREEN
LED Lights
LED1 - Red LED
LED2 Amber LED
Figure 24. Wiring Diagram for the SIT Proflame 2 Electronic Ignition
X2
X1
X3
X4
6
X5
10
4
6
3
4
SW1
115/1/60 Supply
G
Quick Connect
plug to motor
Figure 25. Wiring schematic for optional fans.
B-Series DV-2 Gas Fireplace
GREEN
WHITE
BLACK
To PPO
L1 L2
L2-WH
G
L1-BLK
Page 15