Resetting The Lamp Counter; Checking The Projector Used Time And Lamp Used Time - Sanyo PLC-XF1000 Service Manual

Maintenance

Resetting the Lamp Counter

Be sure to reset the Lamp counter after the lamp is replaced. When the Lamp counter is reset, the LAMP 1/ RE-
PLACE indicator stops lighting and the Lamp replacement icon disappears.
1
Press the MENU button to display the On-Screen Menu.
Use the Point 7 8 buttons to move the red frame point-
er to the Setting Menu icon
2
Use the Point ed buttons to move the red frame point-
er to Lamp counter and then press the SeLect button.
A dialog box appears. Select a lamp and the "Lamp
replacement counter Reset?" appears. Select [Yes] to
continue.
3
Another confirmation dialog box appears and select
[Yes] to reset the Lamp counter.
✔Note:
• Do not reset the Lamp counter without replacing the lamp. Be
sure to reset the Lamp counter only after replacing the lamp.
ORDER REPLACEMENT LAMP
Replacement Lamp Type No. : POA-LMP128
Service Parts No.

Checking the projector used time and lamp used time

The LAMP REPLACE indicator will light yellow when the total lamp used time (Corresponding value) reaches 3,000
hours. This is to indicate that lamp replacement is required.
The total lamp used time is calculated by using the below expression,
Total lamp used time (Corresponding value) =
t
eco: used time in the Eco mode
t
normal : used time in the Normal mode and Auto mode
You can check the lamp used time following to the below procedure.
1
Press and hold the oN/StANd-BY button on the projector or the remote control for more than 0 seconds.
2
The projector used time and lamp used time will be displayed on the screen briefly as follows.
: 610 341 9497
t
eco + (
Counter
Projector
Lamp
Normal
Corresponding value
Total lamp used time
Lamp counter
t
normal x 1.5)
Projector used time
500H
Lamp1 Lamp2
200H 200 H
Eco 300H 300 H
600H 600 H
-14-
Select a lamp and the "Lamp replace-
ment counter Reset?" appears.
Select [Yes], then another
confirmation box appears.
Select [Yes] again to reset
the lamp counter.
Lamp mode
Auto
Normal
Eco