Mazda6_8BG7-EC-10H_Edition1 Page384
Monday, August 2 2010 1:28 PM
In Case of an Emergency
Flat Tire
qJack
To remove the jack
1. Open the trunk mat.
2. Remove the jack container lid.
3. Turn the wing bolt and jack screw
counterclockwise.
Jack screw
7-4
Form No.8BG7-EC-10H
To secure the jack
1. Insert the wing bolt into the jack with
2. Turn the jack screw in the direction
3. Turn the wing bolt completely to
NOTE
If the jack is not completely secured, it could
rattle while driving. Make sure the jack screw
is sufficiently tightened.
Maintenance
Wing bolt
the jack screw pointing front and turn
the wing bolt clockwise to temporarily
tighten it.
shown in the figure.
Jack screw
secure the jack.
Always keep the jack clean.
l
Make sure the moving parts are kept
l
free from dirt or rust.
Make sure the screw thread is
l
adequately lubricated.
Wing bolt