Editing A Label; Entering And Editing Text; Entering Text From The Keyboard; Adding A New Line - Brother p-touch pt-d600 User Manual

EDITING A LABEL

Entering and Editing Text

 Entering Text from the Keyboard

( ) / [Create Label]
 Adding a New Line
Move the cursor to the end of the current line and press (
Line 1
NOTE
• There is a maximum number of lines of text that can be entered for
each tape width. A maximum of 7 lines for 24 mm tape, 5 lines for
18 mm tape, 3 lines for 12 mm tape, 2 lines for 9 mm and 6 mm tape,
and 1 line for 3.5 mm tape.
• When [Input Mode] is set to [Label View], if you press (
add a new line and there is already a maximum number of lines of text
that can be entered for the tape you are using, [Too Many Lines!] will
display. When [Input Mode] is set to [Print Preview], if you press
( ) and seven lines already exist, [Too Many Lines!] will
display. Press (
 Adding a New Block
To create a new block of text/lines to the right of your current text, press
( ) and (
NOTE
• A maximum of 5 blocks can be entered in one label.
• If you press (
[Too Many Blocks!] will display. Press (
the error message.

( ) or (
Line 2
) or any other key to clear the error message.
). The cursor moves to the start of the new block.
) and (

) Enter the character.
Label image
) when five blocks already exist,
) or any other key to clear
).
) to
Entering and Editing Text
15