Honda 2007 Civic GX Online Reference Owner's Manual page 261

Main Menu
Table of Contents
Changing a Flat Tire
WHEEL NUT WRENCH
6. Loosen each wheel nut 1/2 turn
with the wheel nut wrench.
258
JACKING POINTS
7. Place the jack under the jacking
point. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.
EXTENSION
WHEEL NUT WRENCH
8. Use the extension and the wheel
nut wrench as shown to raise the
vehicle until the flat tire is off the
ground.
9. Remove the wheel nuts, then
remove the flat tire. Handle the
wheel nuts carefully; they may be
hot from driving. Place the flat tire
on the ground with the outside
surface facing up.