Honda 2007 Civic GX Online Reference Owner's Manual page 241

Main Menu
Table of Contents
Lights
SOCKET
TAB
3. Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
4. Remove the bulb by turning it one-
quarter turn counterclockwise.
238
5. Insert the new bulb into the hole,
and turn it one-quarter turn
clockwise to lock it in place.
6. Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
7. Turn on the headlights to test the
new bulb.
8. Reinstall the inner fender cover.
Then reinstall the holding clips,
and lock them in place by pushing
on their centers.
Replacing the Front Side Marker/
Parking/Turn Signal Light Bulb
HOLDING CLIP
1. To change the bulb on the driver's
side, start the engine, turn the
steering wheel all the way to the
right, then turn off the engine. To
change the bulb on the passenger's
side, turn the steering wheel to the
left.