Toyota 2006 Camry Owner's Manual page 212

HomeLinkr
25 to
75 mm
(1 to 3 in.)
Hand−held
garage
transmitter
2. Place your hand−held garage transmit-
ter 25 to 75 mm (1 to 3 in.) away from
R
the surface of the HomeLink .
Keep the indicator light on the HomeLink
in view while programming.
208
'06Camry_U (L/O 0507)
3. Simultaneously press and
hand−held garage transmitter
along with the selected HomeLink
ton.
R
Do not release the buttons until step 4
has been completed.
4. When the indicator light
R
HomeLink changes from a slow to a
rapid flash after 20 seconds, you can
release both buttons.
I n f o r ma t i o n P r o v i d e d b y :
hold the 5. Test the operation of the HomeLink
button pressing the newly programmed button.
R
but- If programming a garage door opener,
check to see if the garage door opens
and closes.
If the garage door does not operate, iden-
tify if your garage transmitter is of the
on the
"Rolling Code" type. Press and hold the
R
programmed HomeLink
rage door has the rolling code feature if
the indicator light (on the HomeLink
flashes rapidly and then remains lit after
2 seconds. If your garage transmitter is
the "Rolling Code" type, proceed to the
heading "Programming a rolling code sys-
tem".
2006 CAMRY from July '05 Prod. (OM33708U)
R
by
button. The ga-
R
)