Din Rear-Mount; Fastening The Front Panel (Deh-2000Mp) - Pioneer deh-2000mp Owner's Manual

Section
ID
(Installation
DIN Rear-mount
1 Extend top and bottom of the trim ring
outwards to remove the trim ring. (When
reattaching the trim ring, point the side
with a groove downwards and attach it.)
Trim ring
• It becomes easy to remove the trim ring if
the front panel is released.
2 Determine the appropriate position
where the holes on the bracket and the
side of the unit match.
)
Fastening the front panel
(DEH-2000MP)
If you do not plan to detach the front panel,
the front panel can be fastened with supplied
screw.
Screw
•
~ o
3 Tighten two screws on each side.
Screw
Mounting bracket Dashboard or console
• Use either truss screws (5 mm x 8 mm) or
flush surface screws (5 mm x 9 mm), de-
pending on the shape of screw holes in the
bracket.
C!J
ill)
En