Sony KLV-46X300A Service Manual page 8

1-4. SELF-DIAGNOSTIC SCREEN DISPLAY
For errors with symptoms such as "power sometimes shuts off" or "screen sometimes goes out" that cannot be confirmed, it is possible to
bring up past occurrences of failure for confirmation on the screen:
1-4-1. To Bring Up Screen Test
In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below:
[ SELF-DIAGNOSTIC SCREEN DISPLAY ]
SELF CHECK
002 POW OVP
003 POW ERR1
005 T_CON
006 BACKLITE
007 TEMP ERR
AUD PROT
008
009 FAN_ERR
013 BALANCER
Since the diagnostic results displayed on the screen are not automatically cleared, always check the self-diagnostic screen
After you have completed the repairs, clear the result display to "0".
1-5. Quitting Self-diagnostic screen
To quit the entire self-diagnostic screen, turn off the power switch on the remote commander or the main unit.
D846660B279CC0D5520DEF8E80C6FD0B0509C3DE5F2E1AA6843A75ED6228AB147AA810E8D0815DE5
0000000000
0000000000
0000000000 0000000000
0000000000 0000000000
0000000000 0000000000
0000000000 0000000000
0000000000 0000000000
0000000000 0000000000
0000000000 0000000000
Monitoring Items
For details, refer to "1-1. DIAGNOSTIC TEST INDICATORS"
Number of times STANDBY Indicator flashes
0000000000 00
0000000000
00
0000000000 00
0000000000 00
0000000000 00
0000000000 00
0000000000 00
0000000000 00
KLV-46/52X300A, 46/52W380A (CH) 7