Multitech CDMA Wireless Modem Reference Manual page 149

Parameter
+FNR
+FNS
+FPA
[+FPI]
[+FPP]
+FPR
[+FPS]
+FPW
[+FRQ]
+FRY
+FSA
[+FSP]
Notes
1. Use of option 3 may cause degradations in the quality of certain faxes.
2. Some values for this parameter are optional in EIA/TIA-592. In this standard, all parameters of this command
shall be supported.
3. Class 2.0 represents EIA/TIA-592.
4. Support of packet protocol is optional.
5. Values 4 and 5 of this parameter are optional.
Command Description
+FDR Receive Phase-C data.
+FDT Transmit Phase-C data.
+FIP Initialize facsimile parameters.
+FKS Terminate session.
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
IS-707.3 Fax Parameters
Value (per)
EIA/TIA-592
EIA/TIA-592
TIA/EIA/IS-134
2
EIA/TIA-592
EIA/TIA-5924
EIA/TIA-592
5
EIA/TIA-592
TIA/EIA/IS-134
2
EIA/TIA-592
EIA/TIA-592
TIA/EIA/IS-134
2
EIA/TIA-592
IS-707.3 Fax Action Commands
Description
Negotiation-message-reporting control
parameters
Nonstandard-frame FIF parameter
Selective Polling Address Parameter
Local-polling-ID-string parameter
Packet-protocol-control parameter
Serial port-rate-control parameter
Page-status parameter
Password parameter (Sending or Polling)
Receive-quality-threshold parameters
ECM retry-value parameter
Sub address Parameter
Request-to-poll parameter
Type
Remote
Remote
Remote
Remote
Chapter 18 - Fax Parameters
Type
Remote
Remote
Remote
Remote
Local
Local
Remote
Remote
Remote
Remote
Remote
Remote
149