Multitech CDMA Wireless Modem Reference Manual page 119

Values when Cmd=4 (Setup Call )
<Type>
0:
1:
2:
<CalledNb>
<SubAdress>
<Class>
0:
1:
2:
Values when Cmd=5 (Play tone )
<ToneType>
0:
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
<TimeUnit>
0:
1:
2:
<TimeInterval> (1 –255)
<TextInfo>
Values when Cmd=6 (Sel Item )
<DefaultItem> (1 –255)
<Alpha Identifier menu>
<Idx> (1 –255)
<NbItems> (1 –255)
<Alpha Idx Label>
<HelpInfo>
0:
1:
<NextActionId>
Values when Cmd=7 (Refresh )
<RefreshType>
0:
1:
2:
3:
4:
Values when Cmd=8 (Send SS )
<TextInfo>
Values when Cmd=9 (Send SMS )
<TextInfo>
Values when Cmd=10 (Send USSD )
<TextInfo>
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
Set up call but only if not currently busy on another call
Set up call, putting all other calls (if any) on hold
Set up call, disconnecting all other calls (if any)
Called party number in ASCII format
Called party sub-address in ASCII format
Voice call
Data call
Fax call
Tone Dial
Tone Busy
Tone Congestion
Tone Radio ack
Tone Dropped
Tone Error
Tone Call waiting
Tone Ringing
Tone General beep
Tone Positive beep
Tone Negative beep
Time unit used is minutes
Time unit used is seconds
Time unit used is tenths of seconds
Time required expressed in units
Text information in ASCII format
Default Item Identifier
Alpha identifier of the main menu
Identifier items
Number of items in the menu
Alpha identifier label of items in ASCII format
No help information available
Help information available
Contains a pro-active command identifier.
SlM initialization and full file change notification
File change notification
SIM initialization and file change notification
SIM initialization
SIM reset
Text information in ASCII format.
Text information in ASCII format.
Text information in ASCII format
Chapter 15 – SIM TOOLKIT
119