Pitney Bowes FastPac DI900 Quick Start Manual page 6

Quick Start Guide
Manual Feeder - allows you to manually feed stapled or
3
unstapled sets of up to 5 sheets of 20 lb (80gsm) paper. The
machine waits for each set to be manually fed before folding
and inserting the set automatically into the envelope. The
Manual Feed option is available during job creation. Inserts
and/or Sheets from other Trays can also be added to the job.
Pre-fold Accumulator - is a staging area for the material
4
that needs to be collated together and then sent to the
Folder unit.
Folder - applies one of the available fold types to Sheets.
5
Post-fold Accumulator - is a staging area for the folded
6
Sheets to meet any inserts that are to be included.
Insertion Area - is the part of the transport where the
7
collation intended for a single addresse is inserted into an
outer envelope.
Moistener, Closer, Sealer - Brushes sweep across the
8
envelope flap to wet the glued area of the flap. The envelope
then moves through the Closer and Sealer areas of the unit
to complete the mail piece.
Sealing Solution Bottle - is located inside an opening cover
9
at the front right side of the machine. It provides sealing
solution to the envelope sealing system.
Control Panel - allows you to run the machine and configure
10
job settings. It also displays the machine status and shows
loading instructions and details of the job. See the following
pages for more information on the controls and screen.
High Capacity Envelope Feeder (DI950 only) - holds
11
at least 500 letter-sized envelopes. It feeds directly to the
Insertion Area.
Drop Stacker (available on all units, not illustrated) or Power
Stacker (Optional, not illustrated) - collects and neatly stacks
the finished mail pieces that exit the system. The drop stacker can
be unlatched from the system when it is not needed. The power
stacker is mounted to the system.
6 SV61369 Rev. C