Ps Programming - Panasonic KX-TD7590CE Operating Instructions Manual

PS P
ROGRAMMING
You can change the default settings or the programming of
your PS according to your needs. The possible
programmings and their default displays are shown below.
For programming operations, see pages 30 and 31.
A
NSWER
Selecting the Ringer Pattern
You can set the PS ringer pattern –
intercom calls and CO calls respectively
– 6 bell patterns and 4 melody patterns.
(default: BELL 1)
Selecting the Vibration and Ring Type
You can select the vibration and ring
type.
(default: OFF)
This program can be set in combination
with ringer VOLUME adjustment (see
page 34) as follows.
OFF
PS
RING & VIB
Prog.
VIB→RING
†: Battery life may decrease faster than with the other settings.
Setting the Quick Answer Mode
You can quickly answer an incoming call
by just lifting your PS off the charger.
(default: ON)
Setting the Automatic Answer Mode
You can answer all calls (INT/CO) or
intercom calls (INT ONLY) without
pressing any button when using the
headset.
(default: OFF)
S
ETTING
VOLUME Control Button Adjustment
RINGER
RINGER
RINGER and VIB†
VIB for 5 sec and then RINGER
Display example
RING PATTERN-INT
CHANGE=SELECT
RING PATTERN-CO
CHANGE=SELECT
VIBRATION & RING
CHANGE=SELECT
VIBRATION ON/ MEETING
RINGER OFF
VIB
VIB
VIB
QUICK ANSWER
ON
OFF
AUTO ANSWER
CHANGE=SELECT
BELL1
BELL1
OFF
MODE
VIB
VIB
VIB
OFF
25