Atm Zones; Forced Set; Selecting Forces Set; Non-Omittable Zones - Honeywell Galaxy 8 User Manual

Galaxy 8/18/60/128/500/504/512
ATM PIN + ent
[ent] to Select
1=ATM-1
>A
[ent] to Select
2=ATM-2
ent
DELAY ACCESS
ATM-2 12 mins
ACCESS TIMEOUT
ATM-2 10 mins
ATM PIN + ent
1=RESET ACCESS
2=ABORT ACCESS
1

FORCED SET

PIN + ent
0 = OMIT ZONES
[ent] to select
1
1 = FORCED SET
[ent] to select
ent
3 OMITTED 120
2 Zones Open
[<] [>] to View
ATM 1/2/3/4 ZONES (512 only)
ATM zones are omitted by entering one of the ten ATM codes (user
188 to user 197). To select this option enter an ATM code followed by
the ent key. Use the A> key to scroll through the four ATM zone
options (ATM1 to ATM4) and select by pressing the ent key. A
preprogrammed ATM delay time will expire before omitting all ATM
zones with the selected ATM zone type. The zones will be omitted for
the duration of the ATM time-out period and the remaining time in
minutes will be displayed on the initiating keypad. A warning is given
ten and five minutes before the zones are reinstated. The ATM Time-
out period can be extended by entering an ATM code and selecting
1=Reset Access. To manually reinstate ATM zones, enter an ATM
code and select 2=Abort Access.
(User Level 3 and above)
PURPOSE
When enabled, the FORCED SET option allows the user to
automatically omit zones, eligible for omission, which are open when
the system setting routine is started. Zones omitted in this way remain
omitted for one set period only. This option is not available on the
Galaxy 512.
SELECTING FORCED SET
Access the QUICK MENU. Press key 1 followed by the ent key. The
display indicates how many zones have been omitted and the number
of seconds left before setting.

NON-OMITTABLE ZONES

Some open zones may not be eligible for omission from the system. In
this case the display indicates which zones are open and the exit time is
reset. These zones must be closed before setting can continue.
9
User Guide