Panasonic WV-CP290 Operating Instructions Manual page 13

2
Connect the lens cable to the ALC lens connector of the camera.
ALC lens connector
3
Secure the camera mount bracket (option)
to an installation position, and mount the
camera on the camera mount bracket.
Important:
• The camera mount bracket shall be mounted
on the foundation part of the construction or a
part with adequate strength.
• Recommended screw M6, minimum pull-out
strength196 N {44.06 lbf}.
• The other security measures to prevent
dropping also must be considered when the
total weight of camera and its lens is above
1 kg {2.2 lbs.} in addition to the fall protection
measure functioned
in order to strengthen the fall protection
countermeasure. (The fall protection measure
can be functioned through the coaxial cable
when the total weight is below 1 kg{2.2 lbs.}.)
• When attaching an optional tripod mount
base on the bottom of the camera, use
the removed screws to attach the tripod
mount base. Use of longer or shorter
screws may cause drop or damage.
Recommended tightening torque:
0.39 N·m {0.29 lbf·ft}
by coaxial cable,
1 3
2 4
Pin No.
1
2
3
4
<Installation sample on a ceiling>
Screws (locally
procured)
Tripod socket
hole:
1/4-20 UNC
for tripod
Dump
Dump
Drive
Drive
Camera mount
bracket (option)
Screws (locally
procured)
Tripod mount base
Mounting screws
13