Amplifier Controls - Goldmund METIS 5 User Manual

4

AMPLIFIER CONTROLS

POWER
The METIS 5 integrated amplifier is powered on using the switch located on the back
panel. In regular use this switch should be left ON at all times (see sound quality
optimization). The standby function of the remote control should be used to mute the signal
for safe removal of cables. When in standby mode the front panel operation LED will stay
lit.
The amplifier is powered OFF by switching the back panel switch to the OFF position. A
safety circuit switches the unit to mute to avoid any disturbance reaching the speakers.
MUTING
To mute the preamplifier output, press the "MUTE" key. The same operation repeated
brings back the amplifier to normal operation at the same volume as in operation at the
point the mute function was activated.
VOLUME ADJUSTMENT
The level control may be adjusted manually using the front panel knob or by using the +
and - buttons on the remote control.
SELECTOR
The selector now selects one of five available inputs. Each step clockwise selects the next
input in sequence. Selection may also be made using the remote control by pressing the
key corresponding to the input on the remote control.
GOLDMUND METIS 5 - Integrated Amplifier - 7