Section 5: System Specifications - JBL EON ONE User Manual

Section 5: System Specifications

EON ONE
System
System Type:
Maximum SPL Output:
Frequency Range (-10dB):
Frequency Response (-3dB):
AC input :
Amplifier
Design:
System Power Rating:
Mixer
Input Connectors:
Channels:
Input Impedance:
Output Connectors:
Signal Indicators:
EQ:
System Limiter:
Speaker
LF Driver:
HF Driver:
Coverage Pattern:
Enclosure:
Grille:
Dimensions (H x W x D)
Unit Dimensions:
Packaged Dimensions:
Net Weight of System:
10
Portable Line Array with powered mixer
118 dB peak system output (pink noise)
37�5Hz – 18�5kHz
45Hz – 18kHz
100 - 120 VAC, 220-240 VAC 50/60 Hz
Class D
250 Watts LF, 130 Watts HF
6 inputs (2 Mono Mic/Line, 2 x Stereo)
1-2 are XLR / 1/4" jack combo connectors
(XLR is a mic level input, 1/4" is a line level input)
3-4, one pair of 1/4" balanced TRS jacks (stereo), and a pair of RCA jacks (stereo)
5-6 is a 3�5 mm stereo jack
Ch 1-2 Combo: XLR 40 K Ohms Balanced
Ch 1-2 Combo: TRS 40 K Ohms Balanced
Ch 3-4: TRS 20 K Ohms Balanced
Ch 3-4: RCA 5 K Ohms Unbalanced
Ch 5-6: 3�5 mm 10 K Ohms Unbalanced
Monitor outputs: one pair of RCA jacks (stereo)
Limit: Yellow LED indicates limiter active condition
Individual channel Bass and Treble controls, center detent, +/-12 dB cut and boost
On Board DSP Limiting and Tuning
1 x 254mm (10 in) woofer
6 x 2" drivers
100º x 50º nominal
Polypropylene
Powder coated perforated steel
23.3" x 14.5" x 17" (593mm x 369mm x 434mm)
30.9" x 15.6" x 22.5" (769mm x 397mm x 572mm)
18.51 kg (40.8 lbs)