Setting the Sound Edit
Press the ▲▼ buttons to select Sound Edit,
4.
then press the ENTER or ► button.
Press the ▲▼ buttons to select the desired Speaker,
5.
then press the ◄► button to adjust the settings.
When done, use the ▲▼◄► buttons to select Save,
6.
then press the ENTER button.
If you don't want to save your settings, use the ▲▼◄►
buttons to select Cancel, then press the ENTER button.
M
Press the RETURN butt on to return to the previous menu.
Adjusting Front/Surround Speaker Balance
• You can select between 0, -6, and OFF.
• The volume decreases as you move closer to –6.
Adjusting Center/Surround/Subwoofer Speaker Level
• The volume level can be adjusted in steps from +6dB to
6dB.
• The sound gets louder as you move closer to +6dB and
quieter as you get closer to -6dB.
DSP(Smart Sound) Function
This will regulate and stabilize the volume level against a
drastic volume change when changing channels or during a
scene transition.
Press the DSP button.
•
Each time the button is pressed, the selection changes as
follows:
S.SOUND ON ¨ S.SOUND OFF
AV Sync
Test Tone
System Setup
Speaker Distance
Language Setup
Setup
Audio Setup
Sound Edit
◄
DVD
DVD
Display Setup
HDMI Setup
Network Setup
Parental Setup
AV Sync
Speaker Edit
Test Tone
System Setup
Language Setup
Speaker Distance
Setup
Audio Setup
◄
Sound Edit
DVD
DVD
Display Setup
HDMI Setup
Network Setup
Parental Setup
Save
Cancel
▲
MOVE
ADJUST
RETURN
▼
: 50msec
►
: 50msec
►
41