Mitsubishi Electric MSZ-A09NA Service Manual page 47

(5) WIDE MODE ( )
By selecting WIDE mode with WIDE VANE button, indoor fan speed becomes faster than setting fan speed on the
remote controller (W). The remote controller displays "
NOTE : The position of vane angle 3, angle 4 and angle 5 are different in COOL operation and HEAT operation.
W Indoor fan speed becomes faster than setting fan speed on the remote controller even when
selected.
11-8. TIMER OPERATION
1. How to set the time
(1) Press OPERATE/STOP (ON/OFF) button to start the air conditioner.
(2) Check that the current time is set correctly.
NOTE : Timer operation will not work without setting the current time. Initially "AM0:00" blinks at the current time display of
TIME MONITOR, so set the current time correctly with CLOCK SET button.
How to set the current time
(1)Press the CLOCK set button.
(2)Press the TIME SET buttons (
• Each time FORWARD button (
( ) is press, the set time decreases by 1minute.
• Pressing thoes buttons longer increases / decreases the set time by 10 minutes.
Press the CLOCK set button.
ON timer setting
(1) Press ON-TIMER button(
(2) Set the time of the timer using TIME SET buttons (
OFF timer setting
(1) Press OFF-TIMER button (
(2) Set the time of the timer using TIME SET buttons (
w
Each time FORWARD button (
( ) is pressed, the set time decreases by 10 minutes.
2. Cancel
To cancel ON timer, press ON-TIMER button (
To cancel OFF timer, press OFF-TIMER button(
TIMER is cancelled and the display of set time disappears.
PROGRAM TIMER
• OFF timer and ON timer can be used in combination. The timer of the set time that is reached first will operate first.
• " " and " " display shows the order of OFF timer and ON timer operation.
(Example 1) The current time is 8:00 PM.
The unit turns off at 11:00 PM, and on at 6:00 AM.
NOTE : If the main power is turned off or a power failure occurs while AUTO START/STOP timer is active, the timer setting
is cancelled. As these models are equipped with an auto restart function, the air conditioner starts operating with
timer cancelled when power is restored.
and ) to set the current time.
) is press, the set time increases by 1minute, and each time BACKWARD button
START
) during operation.
STOP
) during operation.
) is pressed, the set time increases by 10 minutes; each time BACKWARD button
START
).
STOP
).
".
w
and ) .
w
and ).
(Example 2) The current time is 11:00 AM.
The unit turns on at 5:00 PM, and off at 9:00 PM.
47
or is