Sony MEX-BT5700U Operating Instructions Manual page 57

Type: Electret condenser microphone (for specified unit only)
Directional characteristics: Unidirectional
Mass: 25 g (0.88 oz) (microphone only)
Dimensions: 10.5 x 24 mm
('/16
x
31/32
in) (microphone only)
You can enjoy improved audio quality of the Bluetooth Audio System
by installing this microphone.
Cautions
Adjusting the microphone angle
Installation
[gJ
Specifications
Adjust the microphone angle to the proper position.
Note
The microphone swivels on
a
single axis, as shown in the diagram below. Do not turn
it the wrong way forcibly
Parts list
ITJ
6-8
Installing on the dashboard
1
Install the microphone
CD
on the clip
®
with the cord
pressed into the groove of the clip
®
<6-8-1).
2
Attach the clip
®
to the dashboard with the double-sided
tape @ <6-8-2).
Note
Before aI/aching the double-sided tape
0,
clean up the surface of the dashboard
with
a
dry cloth.
6-A
Installing on the sun visor
1
Install the microphone
CD
on the clip
®
(6-A-1).
2
Install the clip
®
on the sun visor (6-A-2).
• This microphone is a precision instrument. Never disassemble.
• Keep the microphone away from extremely high temperatures and
humidity.
• It is extremely dangerous if the cord becomes wound around the steering
column or gearstick. Be sure to keep it and other parts from obstructing
your driving.
• If air-bags or any other shock-absorbing equipment is in your car, contact
the store where you purchased
thi~
unit, or the car dealer, before
installation.
There are 2 ways of installation.
• The numbers in the list are keyed to those in the instructions.
• The plug of the microphone
CD
is connected to the connector of the main
unit for the microphone.
2
B
1
SONY: 4-143-386-21 (1 )
Instructions
Microphone
Mode d'emploi
for Bluetooth®
Audio System
XA-MC10
©2009 Sony Corporation
Printed in Thailand
I I
0
CD ®
~
® @
&
x5
t:l