Advertisement
WJoFiDirect
The Wi-Fi Direct function allows you to connect
Wi-Fi Direct devices to the player and each other
using a peepto-peer network, without a wireless
router,
IINOTES II
_, SomeWhFiDirect d evices maynot support t heAIIShare
function if connected viaWi-FiDirect,if this isthe case,
it is advisable to change the network connection method
between devices.
_, Bluetooth transmissions c an interfere withtheWhFi
Direct s ignal.Before youusetheWhFiDirect f unction,
westronglyrecommend t hatyou turnoff theBluetooth
function of anyactivemobile device,
1.
Turn on the Wi-Fi direct device and activate
its Wi-Fi Direct function.
2.
In the Home screen, select Settings, and
then press the _
button.
3.
Select Network, and then press the
button.
4.
Select WioR Direct, and then press the
button.
The Wi-Fi Direct devices that you can
connect appear.
5.
You have three ways to complete the Wi-Fi
connection:
,_ Through the Wi-Fi device.
,_ Through the player using PBC.
,_ Through the player using a PIN.
Each is covered below.
Throughthe WFFi Device
1,
On the Wi-Fi device, follow the procedure on
the device for connecting to another Wi-Fi
Direct device. See the device's user manual
for instructions.
2.
When you have completed the procedure,
you should see a pop-up on your TV screen
saying that a device that supports Wi-Fi
Direct has requested to connect. Select OK,
and then press the _
button to accept.
3.
The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
Through the Player UsingPBC
1.
Select the Wi-Fi Direct device you want to
connect to this player; and then press the
button. The PBC/PIN pop up appears.
2.
Select PBC, and then press the _
button.
The PBC pop-up appears.
3.
Press the PBC button on the Wi-Fi Direct
device within 2 minutes.
4.
The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
Through the Player Usinga PmN
1.
Select the Wi-Fi Direct device you want to
connect to this player; and then press the
button. The PBC/PIN pop up appears.
2.
Select PmN, a nd then press the _
button.
The PIN pop-up appears.
3.
Note the PIN code in the pop-up, and then
enter it into the appropriate field in the Wi-Fi
Direct device you want to connect.
4.
The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
IINOTES t
_' Thecurrentwiredor wirelessnetwork connection w ill be
disconnected w henyou usetheWi--Fi Direct f unction,
_, Textfiles,suchasfileswitha .TXT or ,DOC extension, will
notdisplay whenyou areusingtheWi--Fi Directfunction.
0
CO
d_
English
29
Advertisement
