Advertisement
6. Select avalue toenter (RP Address,
for
exampb),
and t hen p ress _ button. Use
the number
keypad
on your remote control
toenter the numbers
for t he value. You c an
also e nter numbers
using the ATbuttons.
Use t he 4 _ buttons on the remote control
tomove from entry field t oentry field w ithin a
value. When done w ith o ne value, press the
_
button,
7.
Press the A or T button to move to another
value, and then enter the numbers for that
value following the instructions in Step 6.
8.
Repeat Steps 6 and 7 until you have filled in
all values.
t NOTES II
Youcangetthe Network values from yourInternet
provider,
9.
When finished, select OK, and then press the
button. The Security Screen appears.
10. On the Security screen, enter your network's
Security Code or Pass Phrase. Enter
numbers directly using the number buttons
on your remote control. Enter letters by
selecting a letter with the AT _ _ buttons,
and then pressing the _
button.
11. When finished, select Done at the right of the
screen, and then press the _
button.
The player verifies the network connection
and then connects to the network.
12. After the player verifies the network, select
OK, and then press the _
button.
WPS(PBC)
1.
In the Home screen, select Settings, and
then press the _
button.
2.
Select Network, and then press the
button.
3.
Select Network Settings, and then press the
button.
4.
Select Wireless in the Network Settings
screen, and then press the _
button.
5.
Press the A button on your remote, and then
press the _ button to select the WPS(PBC).
6.
Press the _
button on your remote. The
"Press the PBC button" message appears.
7.
Press the WPS(PBC) button on your router
within two minutes. Your player automatically
acquires all the network settings values it
needs and connects to your network.
The Network Status screen appears. The
player connects to the network after the
network connection is verified.
u WPS(PJN)
Before you begin, open the router's setup menu
on your PC and access the screen with the WPS
PiN entry field.
1.
In the Home screen, select Settings, and
then press the _
button.
2.
Select Network, and then press the
button.
3.
Select Network Settings, and then press the
button.
4.
Select Wireless in the Network Settings
screen, and then press the _
button.
The player searches for and then displays a
list of the available networks.
5.
Select the desired network, and then press
the _ button.
6.
Select the WPS(PIN), and then press the
button. The PIN pop-up appears.
7.
Enter the PIN into the WPS PIN entry field in
the router's Set Up screen and then save the
the screen.
IINOTES II
_, Contact t he manufacturer of the routerfor instructions
explaining howto accesstheroute'sSetUpscreens or
referto the router'suser'smanual,
_, ForWPSconnection, setyourwirelessrouter'ssecurity
encryption toAES,Setting toWEPsecurityencryption
doesnotsupport W PSconnection,
28
English
Advertisement
