THUNDER TIGER RAPTOR 30 Assembly And Maintenance Manual page 21

Collective Travel for F3C and 3D Flying
•
To achieve +12û to -8û of collective travel range, the steel linkage ball must be moved to the inner
location as shown in the figure.
•
Use ATV function of the transmittler to get the necessary servo travel.
n High End Blade Pitch Setting
Linkage Position for F3C or 3D
The molded "pointer" should line up with the upper limit mark, which
should provide about 12û of blade pitch.
n
Low End Blade Pitch Setting
Position for F3C or 3D
For intermediates set the low end to -4û. For advanced F3C and 3D flying,
set the low end to -8û.
19
Throttle at High Position
Throttle at Low Position