Note For Repair; Subsidiary Materials - Sony DSLR-A900 Service Manual

NOTE FOR REPAIR

• Make sure that the flat cable and flexible board are not cracked of bent at the terminal.
Do not insert the cable insufficiently nor crookedly.
• When remove a connector, don't pull at wire of connector. It is possible that a wire is snapped.
• When installing a connector, don't press down at wire of connector.
It is possible that a wire is snapped.
• Do not apply excessive load to the gilded flexible board.

SUBSIDIARY MATERIALS

G: Grease
G-15 (J-6082-619-A)
G-85 (J-6082-626-A)
DSLR-A900_L2
2. DISASSEMBLY
2-1
Cut and remove the part of gilt
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)