Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for NAUTICA Yachtimer
Summary of Contents for NAUTICA Yachtimer
- Page 1 YACHTIMER General Setting Count Down Function Chronograph Function...
- Page 2 Count down indicator Small second hand (10 minutes maximum) Central hand To display: — Count down minutes Push button A — Chronograph minutes — Start / Stop Hour / second counter hand Positions To display: — Count down seconds Crown position: —...
- Page 3 A. SET THE TIME - HOUR, MINUTE, DATE 1. Pull the crown to position 3. 2. Turn the crown anti-clockwise to set the time of the day (hour & minute) and the date. 3. Push the crown to position 1. Attention: * The date changes at 00:00midnight, not at 12:00noon.
- Page 4 GENERAL SETTING B. SET THE DATE (QUICK CORRECTION) 1. Pull the crown to position 2. 2. Turn the crown clockwise to move the date to the desired position. 3. Push the crown to position 1. Attention: * Do not do quick date correction between 21:00 and 00:30.
- Page 5 C. SET THE ALARM (12h) 1. Pull the crown to position 2. 2. Turn the crown anti-clockwise to set the alarm hand to the desired alarm time. 3. Push the crown to position 1.
- Page 6 GENERAL SETTING D. ALARM ON / OFF 1. Press C to activate the alarm, 2 beeps emit. 2. Press C again to deactivate the alarm, 1 beep emits. Alarm repetition: If the alarm is not turned “OFF” during the first ringing, a repetition alarm will ring in 2 minutes. (Info: duration of alarm ~ 15 seconds).
- Page 7 F. TO SET THE COUNT DOWN The count down timer allows the user to choose the time to be counted down up to the start of chronograph. The user can set the count down duration between 10 minutes and 1 minute. Adjustment of count down is not allowed during the last minute. Attention: Count down timer can be set only when the count down or chronograph functions have been reset (please refer to “L.Count down / Chronograph Reset”).
- Page 8 COUNT DOWN FUNCTION Exit automatically from the setting mode if there has been no action on B for 3 seconds, 1 beep emits. G. ACTIVATION OF COUNT DOWN Count down in progress ... Display of count Display of count down seconds down minutes 1.
- Page 9 H. COUNT DOWN PROGRESS BEEPER Once count down is activated, there are beepers to communicate to the user about the progress of the count down. 1. During count down, 2 beeps emit every minute up to the last minute. Then: 2.
- Page 10 COUNT DOWN FUNCTION I. “SECOND CHANCE” COUNT DOWN ADJUSTMENT The user can at anytime during the count down period adjust the count down timer, except the last minute. Example: If the count down was set at 10 minutes at the beginning with delay: 1.
- Page 11 J. CHRONOGRAPH STARTS AUTOMATICALLY AFTER COUNT DOWN 1. W h e n c o u n t d o w n i s f i n i s h e d , chronograph starts automatically. 2. The central minute counter hand displays the chronograph minutes (1 step every 12 seconds).
- Page 12 CHRONOGRAPH FUNCTION K. CHRONOGRAPH START/STOP Stop: 1. Press A to stop the chronograph, 1 beep emits to confirm the chronograph “OFF”. Start: 2. Press A again to start the chronograph function, 2 beeps emit to confirm that the chronograph is engaged “ON”.
- Page 13 CHRONOGRAPH FUNCTION L. COUNT DOWN / CHRONO- GRAPH RESET Count down reset: a. Press A to stop the count down, 1 beep emits. b. Press B, the small counter hand at 10H is reset to zero (“60”), and the central hand returns to the previously set count down start time.
- Page 14 REINITIALIZING THE CHRONOGRAPH HANDS (For reset only after battery change or mishandling) Following a battery change, an incorrect actuation, violent impact or exposure to a strong magnetic field, the count down/chronograph counter hands many fail to revert to its original position (zero). To reinitialize the hands, proceed as follows: Attention: Initialization can be done only after having stopped and reset the count down or the chronograph.
- Page 15 REINITIALIZING THE CHRONOGRAPH HANDS Reset of the central counter hand: 3. Press B step-by-step or constantly to adjust the central hand to rest at “12”. 4. Exit from the mode of initalization automatically when the crown is pushed to position 1 or pulled to position 3.