8. Network Settings
w
SUBNET MASK
255 . 000 . 000 . 000
x
SUBNET MASK
255 . 000 . 000 . 000
y
SUBNET MASK
255 . 255 . 255 . 000
z
W 1346 mm
SETUP SHEET
ROLL
If you're using one computer and one machine, this completes the settings to make on the printer. Go on to
Step 3.
If setting the gateway address is required, then go on to the procedure following this one.
3.
Set the gateway address.
NETWORK
GATEWAY ADDR.
v
GATEWAY ADDR.
000 . 000 . 000 . 000
w
GATEWAY ADDR.
255 . 000 . 000 . 000
x
GATEWAY ADDR.
255 . 255 . 000 . 000
y
GATEWAY ADDR.
255 . 255 . 255 . 255
z
W 1346 mm
SETUP SHEET
ROLL
50
Use
to select the address number.
[SUBNET MASK]: 255.255.255.000
Note: For the subnet mask, make the setting the same value as the
one used by the computer. Here, "255.255.255.000" is entered by
way of example.
Press
.
w
x
Repeat
and
to set the subnet mask.
When you've finished making the setting, press
Press
.
Press
to go back to the original screen.
From the screen displayed in
twice.
Press
twice.
Use
to select the address number.
[GATEWAY ADDR.]: 255.255.255.255
Note: For information about the value to enter for the gateway ad-
dress, consult your network administrator. Here, "255.255.255.255" is
entered by way of example.
Press
.
w
x
Repeat
and
to set the gateway address numbers.
When you've finished making the setting, press
Press
.
Press
to go back to the original screen.
.
1.
-
, press
.