Samsung BD-P1600 User Manual page 80

TV
TV
y
Connection AudioNideo
BLU-RAY DISC PLAYER REAR PANEL
HDMI Cable
1.
Using video signal cable(s), connect the
HDMI, COMPONENT
or
VIDEO OUT
terminals on the rear of the Blu-ray Disc
Player to the HDMI, COMPONENT
or
VIDEO IN terminals of your TV.
2.
Using audio signal cable(s), connect Analog or Optical
AUDIO OUT
terminals on the rear of the Blu-ray Disc Player to the
Analog or Optical
AUDIO IN
terminals of your TV.
Audio connection is not needed when the player is connected to your TV using an HDMI
-+
HDMI cable. However, if you
are using an HDMI
-+
DVI cable, audio connection is needed.
3.
Press the input selector on your TV remote control until the signal from the Blu-ray Disc Player appears on the TV screen.
(EJ •
If the player is connected to your TV in HOMI 1OSOp output mode, you must use a High speed(category2) HOMI cable.
e -
English