Haier HP200M2 Installation And Service Manual page 23

Description of the pictograms
Symbol Description
Power ON/OFF switch
Working mode selection
Confirm button
Timer adjust
Boost mode. Heat pump and electric heater are
activated at the same time.
Auto mode
- Prior using heat pump;
- If heat pump works more than the default 8 hours , start
the electric heater
- The default working time can be adjust in the installer settings.
ECO (off-peak) mode
- In this mode ,priority using heat pump.
- In two ways using heat pump,should set in the installer
settings
1- timer refer to LP parameter;
2-switch signals by power companies.
Holiday mode
- According to the vacation dates in advance to prepare
hot water;
- For example, you leave home for vacation on January 1st and
return home on January 5th. The date shall be set as
(5-1) =4 days, and corresponding temperature shall also be set.
The heat-pump will start heating on 00:00 o'clock of January
5th automatically.
- Anti-legionella
- Anti-legionella function will be activated every 7 days to
heat the tank to 65°C automatically .
Hot water volume display
23