Troubleshooting; Service Information; Specifications - Black & Decker GL800 Instruction Manual

ACCESSORIES
Replacement line is available from your local dealer, or a
BLACK+DECKER service center.
Recommended accessories for your trimmer are shown in
this manual. The use of any other accessory or attachment
might be hazardous.
No. Cat. DF-065 Replacement Spool with 40 feet of Nylon
Line.
Caution! Use only recommended accessories with
your string trimmer. The use of any other attachment or
accessory might be hazardous. Use only specially treated.
1,65mm (0,065") diameter Nylon line.

TROUBLESHOOTING

Warning! To avoid serious injury, turn off and unplug
the tool before performing any maintenance.
The tool runs slowly
f Check that the cassette cover can rotate freely. If
necessary, clean it carefully.
f Check that the cutting line does not protrude more than
111mm (4-3/8'') from the cassette. If it does, cut the
excess so that the line is even with the cutting blade.
The automatic line feed is not working
f Keep the tabs pressed and remove the cassette from
the cover in the cutting head.
f Pull the cutting line until it protrudes 111mm (4-3/8'')
from the cassette. If the cutting line left on the spool is
insufficient, install a new cutting line spool.
f Align the tabs on the cassette with the notches on the
cover.
f Push the cassette into the cover until it clicks firmly
into place.
f If the cutting line protrudes beyond the cutting blade,
cut the excess so that it is even with the blade.
If the automatic line feeding still does not work or the spool
is jammed, try the following:
f Carefully clean the cassette and cover.
f Remove the spool and check if the lever on the
cassette can move freely.
f Remove the spool and unwind the cutting line, then wind
it back neatly. Replace the spool within the cassette.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your
BLACK+DECKER product needs replacement, or
if it is of no further use to you, do not dispose of it
with household waste. Make this product available
for separate collection.
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials. Local regulations may
provide for separate collection of electrical
products from the household, at municipal waste
sites or by the retailer when you purchase a new
product.

SERVICE INFORMATION

BLACK+DECKER offers a full network of company-owned and
authorized service locations. All BLACK+DECKER Service
Centers are staffed with trained personnel to provide customers
with efficient and reliable power tool service. For more
information about our authorized service centers and if you
need technical advice, repair, or genuine factory replacement
parts, contact the BLACK+DECKER location nearest you, or
visit us at www.BlackandDecker-la.com

SPECIFICATIONS

Power
Voltage
AR, B2C
B2
B3
BR
No-Load speed
Cutting diameter
Feed type
Weight
Replacement spool
Line size
ENGLISH • 21
GL800
800W
220V ~ 50Hz
220V ~ 60Hz
120V ~ 60Hz
127V ~ 60Hz
7300/min (rpm)
35cm (14")
Automatic
2,7kg (5,9lb)
DF-065
1,65mm (0.065")