1. Main Unit Software Upgrading (USB)
1.1. Introduction
1.1.1. In order to proceed with the Software Updating do not enter into Service Mode.
1.2. Procedure
1.2.1. Insert the USB memory into a side USB terminal with the fi le name "zTVApp_Complete.zimage" on
the root directory.
1.2.2. Once detected the USB it will appear on screen the following request:
1.2. 3. Press "◄" until selecting "Yes".
1.2. 4. Press "OK".
• The software update process starts.
• "Software upgrading progress **%" message appears.
NOTE: During the upgrading process, do not power-off the TV set.
• Once fi nished the process the following success or failed message appears .
1.2. 5. Remove the USB Drive.
1.2. 6. Press OK to reset the TV.
1.2.7. In case of failure, please repeat the upgrade process again.
SOFTWARE UPGRADING
35
LC-40LE732
LC-46LE732