Sharp LC-40LE732E Service Manual page 28

LC-40LE732
LC-46LE732
3. Remote control key operation and description of display in adjustment process mode
1. key operation
Remote control key
Cursor (▼/▲ )
OK
Cursor (◄/►)
MENU
The required input mode should be switched previously to enter the Service Mode.
CAUTION: Use due care in handling the information described here lest the users should know how to enter the
adjustment process mode. If the settings are tampered with in this mode, unrecoverable system
damage may result.
4. Description of display
Figure 1: Main Service Adjustment Menu
M Main version Main version LE732E v0 917 790 173 78 v14 LE732E v0.917 790.173.78 v14
FRC
Hardware
Normal standby cause
INIT T INIT INIT
ETC
PUBLIC MODE
SMARTLOADER
ADC ADJUST
GAMMA
SYSTEM INFORMATION
No. Description
(1) Service Information
(2) Item name
(3) Factory init and Inch setting
Keyboard unit
P ( / ) Moving an item (line) by one (up/down) on "Sharp Factory Menu"
s r
or submenus.
Selecting a submenu on lines 5 to 12 of "Sharp Factory Menu" or
b
executing a function.
V (+/-) Changing a selected item setting value.
MENU Exit of adjustment mode.
Return to "Sharp Factory Menu" from a submenu.
(1)
SHARP FACTORY MENU
2.3.0.180.390.290
SHARP 691
Remote control
(2)
Display specifi cation
Current Software version and others.
Submenus to be checked or adjusted (by pressing "OK" button)
Are shown on INIT submenu
Function
← ← ← Informative (Main microprocessor version).
← ← ← Informative.
← ← ← Informative (Remote Control/Keyboard...).
← ← ← Press "OK" to go to INIT submenu.
← Press "OK" to go to ETC submenu. ← ←
← ← Press "OK" to go to PUBLIC MODE submenu. ←
← ← ← Press "OK" to go to SMARTLOADER submenu.
← ← Press "OK" to go to ADC ADJUST submenu. ←
← ← ← Press "OK" to go to GAMMA submenu.
← ← Press "OK" to go to SYSTEM INFORMATION submenu. ←
(3)
28