Adding Fabric Softener (Option); Water Supply Connector Fi Lter - Samsung WA62H3H3 User Manual

ADDING FABRIC SOFTENER (OPTION)

1. When the proper amount (one time dose) of fabric softener is stored in the softener inlet, it is
automatically added during the last rinse cycle.
2. Do not add detergent, bleach or starch into the softener inlet.
3. Using too much softener may produce unsatisfactory results.
4. Do not open the lid during the Spin cycle. If added too early, its effectiveness
will decrease.
5. Do not leave the softener in the softener dispenser for a long time as it may
congeal.
If the water pressure is low, the fabric softener may remain in the softener
compartment. In this case, put the fabric softener into the tub directly.
Slide and open the cover in the direction of the arrow, insert the rinse
detergent, and slide and close it in the reverse direction.
WATER SUPPLY CONNECTOR FILTER
1. Pull out the fi lter and wash well.
2. Pull in the fi lter and connect the hose to the inlet water valve
tightly.
3. Check if there is a leakage.
Note to tighten up the connector.
GAIA-Sniper_DC68-02910B_EN (India)_140731.indd Sec5:19 GAIA-Sniper_DC68-02910B_EN (India)_140731.indd Sec5:19
English - 19
2014-07-31 2014-07-31 5:59:30 5:59:30