On-Screen Service Menu System - Sanyo LCD-32XH8T Service Manual

General
This set has an On-screen Menu system included in the CPU that allows remote operation for most of the
service adjustments.

On-screen Service Menu System

Quick operation is needed to enter Service Mode.
r How to enter the Service Menu
1. Press the INPUT button on Side Controls or on
the remote control.
2. Press the numeric buttons "2", "5", "8", "0"
orderly on the remote control, and the Service
Mode will be displayed.
[ Service Mode Menu ]
Service Mode
ADC ADJUST
PICTURE MODE
W/B ADJUST
SPECIAL SET
QMAP ADJUST
SW INFORMATION
Backlight Adjust
Over Scan
Software Upgrade
BMTEST
Audio Preset Setting
W/B DATA
ET2 VER 1.83 SANYO_32FHD 2011/3/7
r How to select the service item and adjust data:
With the menu, press ▲, ▼, ◄ or ► button to
navigate through the options or adjust an option.
Press ENTER button to confirm a selection or enter
a sub-menu.
Press BACK button to return to previous layer
menu.
r To exit service mode
Press MENU button to exit service mode.
On-screen Service Menu System
Side Controls
Remote Control
◄► button:
Adjust the data
-9-
INPUT button
Open the Input Source Menu.
MENU button:
Exit Service Mode
BACK button:
Return to previous
layer menu
▲▼ button:
Select Item