Rear Panel Components - HP ProDesk 600 G2 Series Maintenance And Service Manual

Rear panel components

1 PS/2 Keyboard Connector (purple)
2 DisplayPort Monitor Connectors
3 VGA Monitor Connector
4 USB 3.0 Ports (blue)
5 Line-Out Connector for powered audio devices
(green)
6 Power Cord Connector
NOTE: An optional second serial port and an optional parallel port are available from HP.
If using a USB keyboard, HP recommends connecting the keyboard to one of the USB 2.0 ports with the wake from S4/S5
feature. The wake from S4/S5 feature is also supported on the PS/2 connectors if enabled in BIOS F10 Setup.
When a device is plugged into the blue Line-In Audio Connector, a dialog box will pop up asking if you want to use the
connector for a line-in device or a microphone. You can reconfigure the connector at any time by double-clicking the Audio
Manager icon in the Windows taskbar.
When a graphics card is installed in one of the system board slots, the video connectors on the graphics card and/or the
integrated graphics on the system board may be used. The specific graphics card installed and software configuration will
determine the behavior.
The system board graphics can be disabled by changing settings in Computer Setup.
7 PS/2 Mouse Connector (green)
8 Serial Connector
9 RJ-45 Network Connector
10 USB 2.0 Ports with Wake from S4/S5
feature (black)
11 Line-In Audio Connector (blue)
Rear panel components 3