NOTE FOR REPAIR
• Make sure that the flat cable and flexible board are not cracked of bent at the terminal.
Do not insert the cable insufficiently nor crookedly.
• When remove a connector, dont' pull at wire of connector. It is possible that a wire is snapped.
• When installing a connector, dont' press down at wire of connector.
It is possible that a wire is snapped.
DCR-HC23E/HC24E/HC26/HC26E/HC35E_L2
A6CCCE74558B3E905AD2CEF677F0894423B6AFCD862B65C6208BC70309CCFFC90627D9D3C5FDBF50
2. DISASSEMBLY
2-1
Cut and remove the part of gilt
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)