Contec ADA16-32/2(PCI)F User Manual page 52

Repeat
"Repeat" indicates the number of repetitions of sampling to be executed, from when the sampling start
condition is satisfied until the end of sampling, including delayed sampling.
The number of repetitions is set by means of software, for which conversion is repeated. You can set
an infinite number of repetitions, in which case the conversion is terminated by the software abort
command.
Input data items are stored to the memory sequentially. The repetition state can be subject to status
monitoring and application notification.
Clock
The sampling clock controls the sampling frequency. You can select either the internal sampling clock,
external sampling clock, or the output of the event controller.
The sampling clock is selected by means of software.
- Internal sampling clock
The clock signal from the on-board clock generator is used.
- External sampling clock
The edge of the digital signal input from an external device is used for the sampling clock.
- Event controller output
A specified output of the event controller is used as the sampling clock.
Refer to the explanation of the event controller functions or to the driver help for details about the
event controller.
ADA16-32/2(PCI)F
4. Functions
45