Sharp LC-26SA1E Service Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. LCD TV
  5. LC-26SA1E
  6. Service manual
Sharp LC-26SA1E Service Manual

Sharp LC-26SA1E Service Manual

Hide thumbs Also See for LC-26SA1E:
Table of Contents

Advertisement

Quick Links

See also: Operating Manual
TopPage
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its orig-
inal condition and only parts identical to those specified should be used.
[1]
SPECIFICATIONS ................................. . ....... 1-1
[1]
OPERATION MANUAL .......................... . ....... 2-1
[1]
DIMENSIONS ........................................ . ....... 3-1
[1]
LC-26SA1E/RU ...................................... . ....... 4-1
[2]
LC-32SA1E/RU ...................................... . ....... 4-5
[1]
repair, note the following. ....................... . ....... 5-1
[2]
SOFTWARE UPDATING........................ . ....... 5-1
[3]
cess mode.............................................. . ..... 5-11
[4]
[5]
Adjustment process mode menu............ . ..... 5-12
[6]
Special features...................................... . ..... 5-13
[7]
[8]
White Balance Adjustment ..................... . ..... 5-16
Parts marked with "
" are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the
safety and performance of the set.

SERVICE MANUAL

LCD COLOUR TELEVISION
LC-26SA1E/RU
LC-32SA1E/RU
MODELS
CONTENTS
[9]
[11] Lamp error detection ...................................5-18
[12] Public Mode (Hotel Mode) ...........................5-18
[1]
TROBLESHOOTING TABLE .........................6-1
[1]
MAJOR IC INFORMATIONS .........................7-1
DIAGRAM
[1]
OVERALL WIRING DIAGRAM ......................8-1
[2]
BLOCK DIAGRAM.........................................8-3
[3]
POWER BLOCK DIAGRAM ..........................8-5
[1]
[2]
[3]
[4]
[5]
[6]
CHAPTER 10. SCHEMATIC DIAGRAM
[1]
[2]
SCHEMATIC DIAGRAM ..............................10-2
LC-26SA1E/RU, LC32SA1E/RU
No. S66U9LC26SA1E
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
........9-1
......9-17

Advertisement

Table of Contents
loading

Related Manuals for Sharp LC-26SA1E

Summary of Contents for Sharp LC-26SA1E

  • Page 1: Table Of Contents

    DIAGRAM CHAPTER 4. REMOVING OF MAJOR PARTS OVERALL WIRING DIAGRAM ......8-1 REMOVING OF MAJOR PARTS BLOCK DIAGRAM.........8-3 LC-26SA1E/RU ..........4-1 POWER BLOCK DIAGRAM ......8-5 REMOVING OF MAJOR PARTS LC-32SA1E/RU ..........4-5 CHAPTER 9. PRINTED WIRING BOARD OPERATION UNIT PRINTED WIRING BOARD ..9-1...

  • Page 2: Safety Precaution

    LC-26SA1E/RU, LC-32SA1E/RU Service Manual LC-26SA1E SAFETY PRECAUTION IMPORTANT SERVICE SAFETY PRECAUTION Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and the servicing guidelines which follow: WARNING • Use an AC voltmeter having with 5000 ohm per volt, or higher, sen- sitivity or measure the AC voltage drop across the resistor.

  • Page 3: Precautions For Using Lead-Free Solder

    LC-26SA1E/RU, LC-32SA1E/RU Precautions for using lead-free solder Employing lead-free solder • “PWBs” of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on the PWBs and service manuals. The alphabetical character following LF shows the type of lead-free solder.

  • Page 4: Chapter 1. Specifications Specifications

    LC-26SA1E/RU, LC-32SA1E/RU Service Manual LC-26SA1E CHAPTER 1. SPECIFICATIONS [1] SPECIFICATIONS 13.0 17.9 15.2 20.1 1 – 1...

  • Page 5: Chapter 2. Operation Manual Operation Manual

    LC-26SA1E/RU, LC-32SA1E/RU Service Manual LC-26SA1E CHAPTER 2. OPERATION MANUAL [1] OPERATION MANUAL 2 – 1...
  • Page 6 LC-26SA1E/RU, LC-32SA1E/RU 2 – 2...

  • Page 7: Chapter 3. Dimensions Dimensions

    LC-26SA1E/RU, LC-32SA1E/RU Service Manual LC-26SA1E CHAPTER 3. DIMENSIONS [1] DIMENSIONS LC-26SA1E/RU / LC-32SA1E/RU / RU / RU / RU / RU LC-26SA1E/RU LC-32SA1E/RU 3 – 1...

  • Page 8: Chapter 4. Removing Of Major Parts

    LC-26SA1E/RU, LC-32SA1E/RU Service Manual LC-26SA1E CHAPTER 4. REMOVING OF MAJOR PARTS [1] REMOVING OF MAJOR PARTS LC-26SA1E/RU 1. Remove the 4 lock screws . Detach the Stand. 2. Remove the 3 lock screws . 1 lock screw and the 9 lock screws .
  • Page 9 LC-26SA1E/RU, LC-32SA1E/RU 8. Remove all the connectors from PWBs. P201 SC2705 P2302 LV(P2305) LA(P704) P702 SH(P2301) RA(P2303) P701 SC2702 SC2703 SC2704 P1101 P1102 P1201 P703 SC301 RA(P101) SP(P301) 4 – 2...
  • Page 10 LC-26SA1E/RU, LC-32SA1E/RU 9. Remove the 4 lock screws and detach the Power Unit. 10.Remove the 2 lock screws and detach the Tuner Unit and Tuner Earth Plate. 11.Remove the 2 lock screws and detach the Main Unit. 12.Remove the 4 lock screws and detach the AV Unit.
  • Page 11 LC-26SA1E/RU, LC-32SA1E/RU 17.Remove the 8 lock screws and the 6 lock screws , detach the LCD Angle. 18.Remove the LCD Panel Unit from Front Cabinet. LCD Angle LCD Panel Unit Front Cabinet 4 – 4...

  • Page 12: Removing Of Major Parts Lc-32Sa1E/Ru

    LC-26SA1E/RU, LC-32SA1E/RU [2] REMOVING OF MAJOR PARTS LC-32SA1E/RU 1. Remove the 4 lock screws . Detach the Stand. 2. Remove the 6 lock screws . 1 lock screw and the 9 lock screws . Detach the Rear Cabinet. 3. Remove the 2 lock screws and detach the Bottom Cover.
  • Page 13 LC-26SA1E/RU, LC-32SA1E/RU 8. Remove all the connectors from PWBs. P201 SC2705 P2302 LV(P2305) LA(P704) P702 SH(P2301) RA(P2303) P701 SC2702 SC2703 SC2704 P1101 P1102 P1201 P703 SC301 SP(P301) RA(P101) 4 – 6...
  • Page 14 LC-26SA1E/RU, LC-32SA1E/RU 9. Remove the 4 lock screws and detach the Power Unit. 10.Remove the 2 lock screws and detach the Tuner Unit and Tuner Earth Plate. 11.Remove the 2 lock screws and detach the Main Unit. 12.Remove the 4 lock screws and detach the AV Unit.
  • Page 15 LC-26SA1E/RU, LC-32SA1E/RU 17.Remove the 8 lock screws and the 5 lock screws , Detach the LCD Angle. 18.Remove the LCD Panel from Front Cabinet. LCD Angle LCD Panel Unit Front Cabinet 4 – 8...

  • Page 16: Chapter 5. Adjustment Procedure

    The hardware tools requirement are: 1. A Modem-null (Cross type) DB9 female to DB9 female cable. 2. An adaptor DB9 male to mini-Din 9 pin male cable (Sharp Code: QCNWGA015WJPZ) 3. Make the connections as indicated in the figure: Computer TV set Before using RS-232C updating method is necessary to configure a Terminal PC software.
  • Page 17 LC-26SA1E/RU, LC-32SA1E/RU 4) Click on “File\Properties” menu for selecting the General and ASCII properties as follows: 5) Select “New Connection” in the File Menu. 6) Answer “Yes” to close current connection and”Yes” to save session “P55_9600bps”. 7) Create a new connection with the name “P55_115200bps”.
  • Page 18 LC-26SA1E/RU, LC-32SA1E/RU 1) Check the connection between TV set and PC, sending a wrong command, as for example: “aaa”. TV set returns an “ERR” label as an syntaxis ERROR (Not correct order or sequence). 2) Send the command “DWMD” to enter TV set in Download Mode. The TV set answer sending same symbol continuosly. If this symbol character doesn’t appear, please don’t worry and pass to next step.
  • Page 19 The hardware tools requirement are: 1. A Modem-null (Cross type) DB9 female to DB9 female cable. 2. An adaptor DB9 male to mini-Din 9 pin male cable (Sharp Code: QCNWGA015WJPZ) 3. Make the connections as indicated in the figure: Software requirements : To upgrade VCTp software from RS-232C external connector is necessary to use a Tera Term (Pro) free software.
  • Page 20 LC-26SA1E/RU, LC-32SA1E/RU 1) Select: Serial→COM X→ O.K. 2) Select: Terminal 3) Choose the same options as the above picture. 5 – 5...
  • Page 21 LC-26SA1E/RU, LC-32SA1E/RU 4) Select: Setup → Serial port → O.K. Appear the follow screen: 5) Select follows settings: Serial port to use: COM x Baud rate: 9600 Data: 8 bits Parity: none Stop: 1 bit Flow control: none Enter O.K.
  • Page 22 LC-26SA1E/RU, LC-32SA1E/RU 7) Select: File → Transfer → XMODEM → Sent 8) Choose the file for upgrade and click “Open”. 9) After select “Open” the upgrade process starts as follows: 5 – 7...
  • Page 23 3. I2C Method Description The hardware tools requirement are: 1. A Parallel port I2C interface with 20 pin to 3 pin cable (Sharp Code: CKIT-0004WJV0). 2. Make the connections as indicated below: Connect Parallel port I2C interface to LPT port of the computer.
  • Page 24 LC-26SA1E/RU, LC-32SA1E/RU 3) Windows Xp/2000 (“Setup_LptDrv_v020201_XP_2000.exe”). After installing Visual I2C, the new generated file structure should look like this: 4. Check installation LPT driver using “C:\Program Files\Micronas\LptDrv\LptDrvTest.exe”. After run this software, if LPT driver is installed properly must appear this screen: •...
  • Page 25 LC-26SA1E/RU, LC-32SA1E/RU To start updating process follow next instructions: 1. Set Autoread in ON option. 2. Click on “GO” button. 3. Wait until “40” appears in Bootloader Version field. 4. Close DOS pop up windows pressing any key (“Press any key to continue...”.).

  • Page 26: Entering And Exiting The Adjustment Process Mode

    LC-26SA1E/RU, LC-32SA1E/RU [3] Entering and exiting the adjustment process mode 1) Unplug the AC power cord of running TV set to force off the power. 2) While holding down the “VOL(-)” and ”INPUT” keys on the set at once, plug in the AC power cord to turn on the power. The letter appears on the screen.

  • Page 27: Adjustment Process Mode Menu

    LC-26SA1E/RU, LC-32SA1E/RU [5] Adjustment process mode menu The character string in brackets [ ] will appear as a page title in the adjustment process menu header. Page Line Item Description Remarks (adjustment detail, etc.) 1/11 [INFO] Main Version LEW05 01.03(2006/07/15x)5...

  • Page 28: Special Features

    LC-26SA1E/RU, LC-32SA1E/RU Page Line Item Description Remarks (adjustment detail, etc.) 8/11 [M GAMMA 1-3] M GAMMA R 1 W/B adjustment, gradation 1R adjustment value M GAMMA G 1 W/B adjustment, gradation 1G adjustment value M GAMMA B 1 W/B adjustment, gradation 1B adjustment value...

  • Page 29: Video Signal Adjustment Procedure

    LC-26SA1E/RU, LC-32SA1E/RU [7] Video signal adjustment procedure * The adjustment process mode menu is listed in Section 5. 1. Signal check 1. Signal generator level adjustment check (Adjustment to the specified level) •Composite signal PAL : 0.7Vp-p ±0.02Vp-p (Pedestal to white level) •15K component signal...
  • Page 30 LC-26SA1E/RU, LC-32SA1E/RU 5. PAL signal & tuner adjustment Adjustment point Adjustment Conditions Adjustment procedure •Feed the PAL full field colour bar signal (75% colour saturation) to Setting [Signal] EXT3 VIDEO IN. •Feed the RF signal (PAL colour bar) to TUNER.

  • Page 31: White Balance Adjustment

    LC-26SA1E/RU, LC-32SA1E/RU [8] White Balance Adjustment Adjustment gradation values (IN) appear on page 7/11 of process adjustment, and adjustment initial values (offset value) appear on pages 8/11 and 9/11. For white balance adjustment, adjust the offset values on pages 8/11 and 9/11.

  • Page 32: Qs Temperature Nvm Data Con?Rmation

    LC-26SA1E/RU, LC-32SA1E/RU [9] QS Temperature NVM Data Confirmation During servicing of the LCD TV set , by software upgrading or by any cleaning NVM, itÅfs mandatory select the ÅgInch SettingÅh in Service Mode, Page 2, according to the size of the TV set.

  • Page 33: Lamp Error Detection

    LC-26SA1E/RU, LC-32SA1E/RU [11] Lamp error detection 1. Functional description This LCD colour television has a function (lamp error detection) to be turned OFF automatically (Inverter unit) for safety when the lamp or lamp circuit is abnormal. If the lamp or lamp circuit is abnormal, or some other errors happen, and the lamp error detection is executed, the following occur.The Inverter circuit stops but the rest of TV continues working.
  • Page 34 LC-26SA1E/RU, LC-32SA1E/RU If “NO RESPOND” has been selected, “MENU” key, of remote control, is inoperative. 8. ON SCREEN DISPLAY [YES ↔ NO] If “NO” has been selected, the On Screen Display does not appear. 9. INPUT MODE START [ NORMAL → TV (X) → INPUT1 → INPUT2 → INPUT3 → INPUT4 → INPUT5 When any other item than “NORMAL”...

  • Page 35: Chapter 6. Troubleshooting Table

    LC-26SA1E/RU, LC-32SA1E/RU Service Manual LC-26SA1E CHAPTER 6. TROUBLESHOOTING TABLE [1] TROBLESHOOTING TABLE Power unit operation check. Are the power cord and harness in the unit properly connected? Connect the power cord and harness properly, and turn on the power. Is F701 normal?
  • Page 36 LC-26SA1E/RU, LC-32SA1E/RU No sound (1) (during the reception of TV broadcasting) No audio output during UHF/VHF reception Checklist; 1) Is the volume set to MIN or MUTE on the remote control? ••• Set the desired volume. 2) Are headphones connected to HEADPHONE (J1301)? ••• Disconnect them.
  • Page 37 LC-26SA1E/RU, LC-32SA1E/RU No sound from external input devices (2) No sound from an external input device connected to EXT1 (SCART1). <EXT1> Check pins (6) and (2) of SCART1 and connection to an external Is IN1-L audio signal sent from pin (6) of SCART1 terminal input device.
  • Page 38 LC-26SA1E/RU, LC-32SA1E/RU No sound from external input devices (2) No sound from an external input device connected to EXT3. <EXT3> Check pins (3) (J1201) and (5) (J1201) of EXT3 and connection Is IN3-L audio signal sent from pin (3) of J1201 terminal to pin to an external input device.
  • Page 39 LC-26SA1E/RU, LC-32SA1E/RU No sound from external input devices (2) No sound from EXT5 (AUDIO) connecting an external input device. <EXT5> Is HDMI-L audio signal sent from J2701 to pin (14) of IC2704? Is HDMI-R audio signal sent from J2701 to pin (5) of IC2704?
  • Page 40 LC-26SA1E/RU, LC-32SA1E/RU No sound except from speakers (3) No audio output from EXT1 (SCART) terminal. Checklist: 1) Is the MUTE button on the remote control set to ON? ••• Set to OFF. 2) Check the connection to external devices. ••• Is there any improper connection? Is audio signal sent to pins (3) and (1) of EXT1 (J1101)? Check the connection to EXT1 (J1101) and external devices.
  • Page 41 LC-26SA1E/RU, LC-32SA1E/RU No sound except from speakers (3) No audio output from AUDIO OUTPUT terminal. Checklist: 1) Is the MUTE button on the remote control set to ON? ••• Set to OFF. 2) Check the connection to external devices. ••• Is there any improper connection?
  • Page 42 LC-26SA1E/RU, LC-32SA1E/RU <On input of the tuner (U/V)> No picture on the display (1) No picture appears on LCD during the tuner (U/V) reception. Checklist: on the remote control set up correctly? ••• See the operation manual and set “INPUT SOURCE” to “TV”.
  • Page 43 LC-26SA1E/RU, LC-32SA1E/RU <During external connection> No picture on the monitor (2) SCART1: No picture appears on EXT1 - connected monitor during the tuner (U/V) reception. Checklist: on the remote control set up correctly? ••• See the operation manual and 1) Are input terminal on back of TV and “INPUT SOURCE” button set “INPUT SOURCE”...
  • Page 44 LC-26SA1E/RU, LC-32SA1E/RU <During external connection> No picture on the monitor (2) SCART2: No picture from EXT1 appears on EXT2-connected monitor. NOTE: Normally, if the screen during display is sent to EXT2, no picture is sent to EXT2. Checklist: on the remote control set up correctly? ••• See the operation manual and 1) Are input terminal on back of TV and “INPUT SOURCE”...
  • Page 45 LC-26SA1E/RU, LC-32SA1E/RU <During external connection> No picture on the monitor (2) SCART2: No picture from EXT3 appears on EXT2- connected monitor. Checklist: on the remote control set up correctly? ••• See the operation manual and 1) Are input terminal on back of TV and “INPUT SOURCE” button set “INPUT SOURCE”...
  • Page 46 LC-26SA1E/RU, LC-32SA1E/RU <When EXT1 is used for external input> No picture on the display (3) No EXT1-Composite output of the external input system. Checklist: on the remote control set up correctly? ••• See the operation manual and set “INPUT SOURCE” to “EXIT”.
  • Page 47 LC-26SA1E/RU, LC-32SA1E/RU <When EXT1 is used for external input> No picture on the display (3) No EXT1-RGB output of the external input system. Checklist: on the remote control set up correctly? ••• See the operation manual and set “INPUT SOURCE” to “EXIT”.
  • Page 48 LC-26SA1E/RU, LC-32SA1E/RU <When EXT1 is used for external input> No picture on the display (3) No EXT1-Y/C output of the external input system. Checklist: on the remote control set up correctly? ••• See the operation manual and set “INPUT SOURCE” to “EXIT”.
  • Page 49 LC-26SA1E/RU, LC-32SA1E/RU <When EXT2 is used for external input> No picture on the display (4) No EXT2-Composite output of the external input system. Checklist: on the remote control set up correctly? ••• See the operation manual and set “INPUT SOURCE” to “EXT2”.
  • Page 50 LC-26SA1E/RU, LC-32SA1E/RU <When EXT2 is used for external input> No picture on the display (4) No EXT2-RGB output of the external input system. Checklist: on the remote control set up correctly? ••• See the operation manual and set “INPUT SOURCE” to “EXT2”.
  • Page 51 LC-26SA1E/RU, LC-32SA1E/RU <When EXT2 is used for external input> No picture on the display (4) No EXT2-Y/C output of the external input system. Checklist: on the remote control set up correctly? ••• See the operation manual and set “INPUT SOURCE” to “EXT2”.
  • Page 52 LC-26SA1E/RU, LC-32SA1E/RU <When EXT3 is used for external input> No picture on the display (5) No EXT3 output of the external input system. Checklist: on the remote control set up correctly? ••• See the operation manual and set “INPUT SOURCE” to “EXT3”.
  • Page 53 LC-26SA1E/RU, LC-32SA1E/RU <When EXT3 is used for external input> No picture on the display (5) No EXT3-Y/C output of the external input system. Checklist: on the remote control set up correctly? ••• See the operation manual and set “INPUT SOURCE” to “EXT3”.
  • Page 54 LC-26SA1E/RU, LC-32SA1E/RU <When EXT4 is used for external input> No picture on the display (6) No EXT4 (15pin-D-SUB terminal) output of the external input system. Checklist: on the remote control set up correctly? ••• See the operation manual set “INPUT SOURCE” to “EXT4”.
  • Page 55 LC-26SA1E/RU, LC-32SA1E/RU <When EXT5 is used for external input> No picture on the display (7) No EXT5 (HDMI) output of the external input system. Checklist: on the remote control set up correctly? ••• See the operation manual and set “INPUT SOURCE” to “EXT5”.
  • Page 56 LC-26SA1E/RU, LC-32SA1E/RU <26/32”> Backlight failure to light up Do all the fluorescent tubes light up? Check the individual fluorescent Replace any defective fluorescent tubes for light-up failure tube (s) with new one (s). Is the power supplied to the inverter...
  • Page 57 LC-26SA1E/RU, LC-32SA1E/RU LCD failure Does a single or several vertical Replace the LCD panel. stripes appear on the LCD screen? LCD failure Does a single or several horizontal Replace the LCD panel. stripes appear on the LCD screen? LCD failure Do luminescent or black dots appear Replace the LCD panel.

  • Page 58: Chapter 7. Major Ic Informations

    LC-26SA1E/RU, LC-32SA1E/RU Service Manual LC-26SA1E CHAPTER 7. MAJOR IC INFORMATIONS [1] MAJOR IC INFORMATIONS 1. General ICs Information Ref No. Name Part Code Description Drawing Name KD890FM (MAIN UNIT) IC1905 HDMI-Receiver VHISII9021+-1Q The SiI9021 is a second generation panel Link Cinema receiver that is compat- ible with the HDMI 1.1 (High Definition Multimedia interface) specification.
  • Page 59 LC-26SA1E/RU, LC-32SA1E/RU Ref No. Name Part Code Description Drawing Name KD605FM (POWER UNIT) IC705 Switching VHIMR4020++-1 This IC is a power supply for the switching regulator on the primary side. Regulator Overvoltage/overcurrent protection circuit, other protection circuits and control circuits are built in this IC.
  • Page 60 LC-26SA1E/RU, LC-32SA1E/RU 2. Detailed ICs Information 2.1. IC1905 (VHISII9021+-1Q) 2.1.1 Block Diagram 7 – 3...
  • Page 61 LC-26SA1E/RU, LC-32SA1E/RU 2.1.2 Pin Connections and short description Pin No. Pin Name Type Description 24-bit Output Pixel Data Bus. 24-bit Output Pixel Data Bus. 24-bit Output Pixel Data Bus. 24-bit Output Pixel Data Bus. 24-bit Output Pixel Data Bus. 24-bit Output Pixel Data Bus.
  • Page 62 LC-26SA1E/RU, LC-32SA1E/RU Pin No. Pin Name Type Description R0XC+ TMDS input clock pair. HDMI Port 0 R0XC- TMDS input clock pair. HDMI Port 0 R0X0+ TMDS input data pair. HDMI Port 0 R0X0- TMDS input data pair. HDMI Port 0 R0X1+ TMDS input data pair.
  • Page 63 LC-26SA1E/RU, LC-32SA1E/RU 2.2. IC2701 (VHITVHC153T-1Y) 2.2.1 Block Diagram 2.2.2 Pin Connections and short description Pin No. Pin Name Pin Function Strobe input 1G. Address input B. Channel input 1C3. Channel input 1C2. Channel input 1C1. Channel input 1C0. Output signal 1Y.
  • Page 64 LC-26SA1E/RU, LC-32SA1E/RU 2.3. IC3002 (RH-IXB624WJN1Q) 2.3.1 Block Diagram 2.3.2 Pin Connections and short description Pin No. Pin Name Pin Function Sheet Name 656O6 Digital 656 Bit 6 Output FRCI [6] 656O5 Digital 656 Bit 5 Output FRCI [5] 656O4 Digital 656 Bit 4 Output...
  • Page 65 LC-26SA1E/RU, LC-32SA1E/RU Pin No. Pin Name Pin Function Sheet Name SIFIN+ Differential Sound IF Input SIFIN- Differential Sound IF Input – VSUP5.0 – Supply Voltage Analog, 5.0 V GNDA – Ground Analog, Platform Ground GND3.3DIG – Ground Digital Interfaces VSUP3.3DIG –...
  • Page 66 LC-26SA1E/RU, LC-32SA1E/RU Pin No. Pin Name Pin Function Sheet Name GND3.3IO1 – Ground Digital Input/Output Port 1 VSUP3.3IO1 – Supply Voltage Input/Output Port 1, 3.3 V 3.3V OSDCLK Graphic Clock Input/Output open OSDFSW Graphic Fast Switch Input/Output open P3_7 Port3,bit7 Input/Output...
  • Page 67 LC-26SA1E/RU, LC-32SA1E/RU Pin No. Pin Name Pin Function Sheet Name P1_7 Port 1, Bit 7 Input/Output IF_AGC P1_6 Port 1, Bit 6 Input/Output SLOW SW1 P1_5 Port 1, Bit 5 Input/Output SLOW SW2 P1_4 Port 1, Bit 4 Input/Output KEY_ETC GND3.3DAC...
  • Page 68 LC-26SA1E/RU, LC-32SA1E/RU 2.4. IC3003 (RH-IXB664WJZZY) 2.4.1 Block Diagram 2.4.2 Pin Connections and short description Pin No. Pin Name Pin Function Sheet Name PICAA0 OPC_in Signal. OPCIN PICAA1 Connect to TH3001. TH3001 PICA2 TEM3 Signal. TEMP3 PICA3 TEMP2 Signal. TEMP2 PICA4 TEMP1 Signal.
  • Page 69 LC-26SA1E/RU, LC-32SA1E/RU Pin No. Pin Name Pin Function Sheet Name CCPI INVERTER_BRT Signal. PWMOUT (INV_BRT) PICSCL3 I2C clock. BU_SCL3 PICSDA3 I2C data. BU_SDA3 – Open Open 3.3V – Power Supply for microcontroller VSUP3.3DRI 8, 19 – Ground reference for microcontroller...
  • Page 70 LC-26SA1E/RU, LC-32SA1E/RU 2.5. IC2301 (VHIISL83220-1Y) 2.5.1 Block Diagram 2.5.2 Pin Connections and short description Pin No. Pin Name Pin Function – System power supply input (3.0V to 5.5V). – Intemally generated positive transmitter supply (+5.5V). – Internally generated negative transmitter supply (-5.5V).
  • Page 71 LC-26SA1E/RU, LC-32SA1E/RU 2.6. IC1710 (RH-IXB823WJZZQ) 2.6.1 Block Diagram 2.6.2 Pin Connections and short description Pin No. Pin Name Pin Function Sheet Name EXP [7] Outport [7] DTI2CSEL EXP [6] Outport [6] DTM_RESET EXP [5] Outport [5] DTV_ON GND* – Ground N.C.
  • Page 72 LC-26SA1E/RU, LC-32SA1E/RU Pin No. Pin Name Pin Function Sheet Name GND* – N.C. N.C. #TMS Pin for JTAG write FPGA_TMS #TDI Pin for JTAG write FPGA_TDI #TCK Pin for JTAG write FPGA_TCK #TDO Pin for JTAG write FPGA_TDO VSYNC V sync input (not used)
  • Page 73 LC-26SA1E/RU, LC-32SA1E/RU Pin No. Pin Name Pin Function Sheet Name GND* – N.C. GND* – N.C. GND* – N.C. GND* – N.C. GND* – N.C. GND* – N.C. EXP [4] Outport [4] PCON2 (EP4) GND* – N.C. GNDIO – Ground.
  • Page 74 LC-26SA1E/RU, LC-32SA1E/RU Pin No. Pin Name Pin Function VIN Terminal. Collector Collector Terminal. 7 – 17...
  • Page 75 LC-26SA1E/RU, LC-32SA1E/RU 2.8. IC201 (VHITDA9886+-1Y) 2.8.1 Block Diagram 2.8.2 Pin Connections and short description Pin No. Pin Name Pin Function VIF1 VIF differential input 1 VIF2 VIF differential input 2 Output port 1; open-collector. FMPLL FM-PLL for loop filter. DEEM De-emphasis output for capacitor.

  • Page 76: Chapter 8. Overall Wiring Diagram/Block

    LC-26SA1E/RU, LC-32SA1E/RU Service Manual LC-26SA1E CHAPTER 8. OVERALL WIRING DIAGRAM/BLOCK DIAGRAM [1] OVERALL WIRING DIAGRAM WIRIN DIAGRAM 8 – 1...
  • Page 77 LC-26SA1E/RU, LC-32SA1E/RU 8 – 2...

  • Page 78: Block Diagram

    LC-26SA1E/RU, LC-32SA1E/RU [2] BLOCK DIAGRAM BLOCK DIAGRAM KEY-UNIT DUNTKD606FMVO (26/32) POWER SW LCD-MODULE A3KU1A26EK S156 P0035GE R1LK260T3LF14 (26) A3IU1A26E1 R1LK315T3LF14 (32) A3IU1A32E1 TUNER-UNIT DUNTKD608FM06/07(26/32) IC201 TU201 BACK-LIGHT RTUNQA021WJZZ P201 QCNCMA012WJ MAIN-UNIT SC2705 DUNTKD890FM12/13(26/32) PC-INPUT RS-232C IC2301 IC1710 26/32 INCH INVERTER UNIT...
  • Page 79 LC-26SA1E/RU, LC-32SA1E/RU R1LK260T3LF14 (26) A3IU1A26E1 LCD-MODULE RRMCGA531WJSA (26/32) R1LK315T3LF14 (32) A3IU1A32E1 TFT LCD PANEL QCNWGA075WJPZ LCD-CONT-UNIT CPLD DUNTKD605FM10/11 (26/32) POWER-UNIT SP-BOX LED UNIT (RCORFA020WJZZ) QACCKA021WJPZ ( E / F / I / R ) AC- CORD QACCBA073WJPZ (K) AC - IN ( 26/32 ) 8 –...

  • Page 80: Power Block Diagram

    LC-26SA1E/RU, LC-32SA1E/RU [3] POWER BLOCK DIAGRAM POWER BLOCK DIAGRAM 8 – 5...
  • Page 81 LC-26SA1E/RU, LC-32SA1E/RU 8 – 6...

  • Page 82: Chapter 9. Printed Wiring Board

    LC-26SA1E/RU, LC-32SA1E/RU Service Manual LC-26SA1E CHAPTER 9. PRINTED WIRING BOARD [1] OPERATION UNIT PRINTED WIRING BOARD KEY Unit (SIDE-A) 9 – 1...

  • Page 83: R/C, Led Unit Printed Wiring Board

    LC-26SA1E/RU, LC-32SA1E/RU [2] R/C, LED UNIT PRINTED WIRING BOARD R/C,LED Unit (SIDE-A) R/C,LED Unit (SIDE-B) 9 – 2...

  • Page 84: Main Unit Printed Wiring Board

    LC-26SA1E/RU, LC-32SA1E/RU [3] MAIN UNIT PRINTED WIRING BOARD MAIN Unit (SIDE-A) 9 – 3...
  • Page 85 LC-26SA1E/RU, LC-32SA1E/RU 9 – 4...
  • Page 86 LC-26SA1E/RU, LC-32SA1E/RU MAIN Unit (Chip SIDE-A) 9 – 5...
  • Page 87 LC-26SA1E/RU, LC-32SA1E/RU 9 – 6...
  • Page 88 LC-26SA1E/RU, LC-32SA1E/RU MAIN Unit (SIDE-B) 9 – 7...
  • Page 89 LC-26SA1E/RU, LC-32SA1E/RU 9 – 8...
  • Page 90 LC-26SA1E/RU, LC-32SA1E/RU MAIN Unit (Chip SIDE-B) FB1908 C1971 Q2301 C1970 FL1904 R 2312 C2302 FB1909 C2303 FL1905 C2304 C1972 C1966 C1965 C2305 C1978 C1973 C1967 C1964 Q1906 R J2311 C1920 R 1910 R J2310 Q1908 FB1904 C1940 C1938 FB1907 C1921...
  • Page 91 LC-26SA1E/RU, LC-32SA1E/RU R 2710 Q2703 R 2708 C3308 Q2708 R 2716 C3309 C2715 C3311 C2724 IC3301 C3313 FB2711 IC2704 C3316 C3317 C3320 C3337 C3339 C1730 C1729 R 1753 R J2710 R 1744 R 1754 IC1708 IC1703 C1728 C1726 IC1702 IC1707...

  • Page 92: Av Unit Printed Wiring Board

    LC-26SA1E/RU, LC-32SA1E/RU [4] AV UNIT PRINTED WIRING BOARD AV Unit (SIDE-A) 9 – 11...
  • Page 93 LC-26SA1E/RU, LC-32SA1E/RU 9 – 12...
  • Page 94 LC-26SA1E/RU, LC-32SA1E/RU AV Unit (Chip SIDE-A) FB1101 D1102 R 1119 D1105 R 1131 C1105 C1108 D1117 C1154 D1121 C1109 R 1110 FL1104 FL1108 C1130 R 1113 R 1111 FL1105 R 1128 D1103 FB1102 C1115 D1107 R 1124 R 1104 C1101...
  • Page 95 LC-26SA1E/RU, LC-32SA1E/RU C1108 R 361 D318 C1130 C358 D1107 D308 D306 R 353 C1147 C1131 D307 D1119 C303 C356 C357 C304 D1109 R 1140 Q303 C310 C365 Q304 C309 C366 R 309 R 312 R 308 R 313 R 324...
  • Page 96 LC-26SA1E/RU, LC-32SA1E/RU AV Unit (SIDE-B) 9 – 15...
  • Page 97 LC-26SA1E/RU, LC-32SA1E/RU 9 – 16...

  • Page 98: Power Unit Printed Wiring Board

    LC-26SA1E/RU, LC-32SA1E/RU [5] POWER UNIT PRINTED WIRING BOARD POWER Unit (Side-A) 9 – 17...
  • Page 99 LC-26SA1E/RU, LC-32SA1E/RU 9 – 18...
  • Page 100 LC-26SA1E/RU, LC-32SA1E/RU POWER Unit (Chip Parts Side-B) 9 – 19...
  • Page 101 LC-26SA1E/RU, LC-32SA1E/RU 9 – 20...

  • Page 102: Tuner Unit Printed Wiring Board

    LC-26SA1E/RU, LC-32SA1E/RU [6] TUNER UNIT PRINTED WIRING BOARD C202 R207 R206 C203 R208 R201 C205 FB201 R248 C208 R246 C209 R215 C211 R213 R220 R221 R214 R211 Q201 L202 L201 R217 C213 R224 R223 D204 D205 D203 R219 R205 C235...

  • Page 103: Description Of Schematic Diagram

    LC-26SA1E/RU, LC-32SA1E/RU Service Manual LC-26SA1E CHAPTER 10. SCHEMATIC DIAGRAM [1] DESCRIPTION OF SCHEMATIC DIA- GRAM VOLTAGE MEASUREMENT CONDITION: 1. The voltages at test points are measured on exclusive AC adaptor and the stable supply voltage of AC 230V. Signals are fed by a colour bar signal generator for servicing pur- pose and the above voltages are measured with a 20k ohm/V tester.

  • Page 104: Schematic Diagram

    LC-26SA1E/RU, LC-32SA1E/RU [2] SCHEMATIC DIAGRAM MAIN Unit-1 (LC-26SA1E/RU) 10 – 2...
  • Page 105 LC-26SA1E/RU, LC-32SA1E/RU 10 – 3...
  • Page 106 LC-26SA1E/RU, LC-32SA1E/RU MAIN Unit-1 (LC-32SA1E) 10 – 4...
  • Page 107 LC-26SA1E/RU, LC-32SA1E/RU 10 – 5...
  • Page 108 LC-26SA1E/RU, LC-32SA1E/RU MAIN Unit-2 (LC-26SA1E/RU) 10 – 6...
  • Page 109 LC-26SA1E/RU, LC-32SA1E/RU 10 – 7...
  • Page 110 LC-26SA1E/RU, LC-32SA1E/RU MAIN Unit-2 (LC-32SA1E/RU) 10 – 8...
  • Page 111 LC-26SA1E/RU, LC-32SA1E/RU 10 – 9...
  • Page 112 LC-26SA1E/RU, LC-32SA1E/RU MAIN-3 Unit (LC-26SA1E/RU) 10 – 10...
  • Page 113 LC-26SA1E/RU, LC-32SA1E/RU 10 – 11...
  • Page 114 LC-26SA1E/RU, LC-32SA1E/RU MAIN Unit-3 (LC-32SA1E/RU) 10 – 12...
  • Page 115 LC-26SA1E/RU, LC-32SA1E/RU 10 – 13...
  • Page 116 LC-26SA1E/RU, LC-32SA1E/RU MAIN Unit-5 (LC-26SA1E/RU) 10 – 14...
  • Page 117 LC-26SA1E/RU, LC-32SA1E/RU 10 – 15...
  • Page 118 LC-26SA1E/RU, LC-32SA1E/RU MAIN Unit-5 (LC-32SA1E/RU) 10 – 16...
  • Page 119 LC-26SA1E/RU, LC-32SA1E/RU 10 – 17...
  • Page 120 LC-26SA1E/RU, LC-32SA1E/RU MAIN Unit-6 (LC-26SA1E/RU) 10 – 18...
  • Page 121 LC-26SA1E/RU, LC-32SA1E/RU 10 – 19...
  • Page 122 LC-26SA1E/RU, LC-32SA1E/RU MAIN Unit-6 (LC-32SA1E/RU) 10 – 20...
  • Page 123 LC-26SA1E/RU, LC-32SA1E/RU 10 – 21...
  • Page 124 LC-26SA1E/RU, LC-32SA1E/RU AV Unit (LC-26SA1E/RU) 10 – 22...
  • Page 125 LC-26SA1E/RU, LC-32SA1E/RU 10 – 23...
  • Page 126 LC-26SA1E/RU, LC-32SA1E/RU POWER Unit (LC-26SA1E/RU) 10 – 24...
  • Page 127 LC-26SA1E/RU, LC-32SA1E/RU 10 – 25...
  • Page 128 LC-26SA1E/RU, LC-32SA1E/RU POWER Unit (LC-32SA1E/RU) 10 – 26...
  • Page 129 LC-26SA1E/RU, LC-32SA1E/RU 10 – 27...
  • Page 130 LC-26SA1E/RU, LC-32SA1E/RU TUNER Unit (LC-26SA1E/RU) 10 – 28...
  • Page 131 LC-26SA1E/RU, LC-32SA1E/RU 10 – 29...
  • Page 132 LC-26SA1E/RU, LC-32SA1E/RU TUNER Unit (LC-32SA1E/RU) 10 – 30...
  • Page 133 LC-26SA1E/RU, LC-32SA1E/RU 10 – 31...
  • Page 134 LC-26SA1E/RU, LC-32SA1E/RU OPERATION Unit 10 – 32...
  • Page 135 LC-26SA1E/RU, LC-32SA1E/RU 10 – 33...
  • Page 136 LC-26SA1E/RU, LC-32SA1E/RU R/C,LED Unit 10 – 34...
  • Page 137 LC-26SA1E/RU, LC-32SA1E/RU 10 – 35...
  • Page 138 LC-26SA1E/RU, LC-32SA1E/RU – M E M O – 10 – 36...

  • Page 139: Parts Guide

    LC-26SA1E/RU, LC-32SA1E/RU PartsGuide PARTS GUIDE LCD COLOUR TELEVISION LC-26SA1E/RU LC-32SA1E/RU MODELS CONTENTS PRINTED WIRING BOARD DUNTKD608FM06/FM07 ASSEMBLIES (TUNER Unit) (NOT REPLACEMENT ITEM) (LC-26SA1E/RU, LC-32SA1E/RU) LCD PANEL AND TUNER DUNTKD890FM12/FM13 (NOTE: THE PARTS HERE (MAIN Unit) SHOWN ARE SUPPLIED AS AN...

  • Page 140: Printed Wiring Board Assemblies (Not Replacement Item)

    MAIN Unit (LC-26SA1E/F/I/K/RU) DUNTKD890FM13 MAIN Unit (LC-32SA1E/F/I/K/RU) [2] LCD PANEL AND TUNER(NOTE: THE PARTS HERE SHOWN ARE SUPPLIED AS AN ASSEMBLY BUT NOT INDEPENDENTLY.) R1LK260T3LF14 26V LCD Panel Module Unit (LC-26SA1E/RU) R1LK315T3LF14 32V LCD Panel Module Unit (LC-32SA1E/RU) TU201 RTUNQA021WJZZ U/V Tuner...
  • Page 141 LC-26SA1E/RU, LC-32SA1E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [3] DUNTKD604FM12/FM13 (AV Unit) (LC-26SA1E/RU, LC-32SA1E/RU) C1101 VCKYTV1EB104KY Capacitor, 0.1 25V Ceramic C1102 VCKYTV1EB104KY Capacitor, 0.1 25V Ceramic C1103 VCKYTV1EB104KY Capacitor, 0.1 25V Ceramic C1104 VCCCCY1HH101JY Capacitor, 100p 50V Ceramic...
  • Page 142 LC-26SA1E/RU, LC-32SA1E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [3] DUNTKD604FM12/FM13 (AV Unit) (LC-26SA1E/RU, LC-32SA1E/RU) D314 RH-EXA101WJZZY Zener Diode, UDZSTE-1730B D315 RH-EXA101WJZZY Zener Diode, UDZSTE-1730B D316 RH-EXA101WJZZY Zener Diode, UDZSTE-1730B D317 RH-EXA101WJZZY Zener Diode, UDZSTE-1730B D318 VHD1SS390++-1Y Diode, 1SS390TE61...
  • Page 143 LC-26SA1E/RU, LC-32SA1E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [3] DUNTKD604FM12/FM13 (AV Unit) (LC-26SA1E/RU, LC-32SA1E/RU) Q1103 VS2SA1530AR-1Y Transistor, 2SA1530A-T112-1R Q1104 VS2SA1530AR-1Y Transistor, 2SA1530A-T112-1R Q1105 VSDTC314TK/-1Y Transistor, DTC314TKT146 Q1106 VSDTC314TK/-1Y Transistor, DTC314TKT146 Q1107 VS2SA1530AR-1Y Transistor, 2SA1530A-T112-1R Q1108 VS2SA1530AR-1Y Transistor, 2SA1530A-T112-1R...

  • Page 144: Duntkd605Fm10/Fm11

    LC-26SA1E/RU, LC-32SA1E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [3] DUNTKD604FM12/FM13 (AV Unit) (LC-26SA1E/RU, LC-32SA1E/RU) R1119 VRS-TW2ED101JY Resistor, 100 1/4W Metal Oxide R1120 VRS-CY1JF000JY Resistor, 0 1/16W Metal Oxide R1121 VRS-TW2ED750JY Resistor, 75 1/4W Metal Oxide R1123 VRS-TW2ED750JY Resistor, 75 1/4W Metal Oxide...
  • Page 145 LC-26SA1E/RU, LC-32SA1E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [4] DUNTKD605FM10/FM11 (POWER Unit) (LC-26SA1E/RU, LC-32SA1E/RU) C735 RC-EZA489WJZZ+ Capacitor, 47 35V Electrolytic C736 RC-EZA489WJZZ+ Capacitor, 47 35V Electrolytic C739 VCCCCY1HH102JY Capacitor, 1000p 50V Ceramic C740 RC-KZ0105GEZZ Capacitor, 2200p 250V Ceramic...
  • Page 146 LC-26SA1E/RU, LC-32SA1E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [4] DUNTKD605FM10/FM11 (POWER Unit) (LC-26SA1E/RU, LC-32SA1E/RU) D759 RH-EXA101WJZZY Zener Diode, UDZSTE-1730B D761 VHDD1FL20U/-1Y Diode, D1FL20U D762 VHEST03D170-1 Zener Diode, HEST03D170 D763 RH-EX1394CEZZY Zener Diode, UDZSTE-175.6B D765 VHD1SS355//-1Y Diode, 1SS355TE-17 D767...
  • Page 147 LC-26SA1E/RU, LC-32SA1E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [4] DUNTKD605FM10/FM11 (POWER Unit) (LC-26SA1E/RU, LC-32SA1E/RU) R773 VRS-TV1JD103JY Resistor, 10k 1/16W Metal Oxide R774 VRS-TV1JD103JY Resistor, 10k 1/16W Metal Oxide R775 VRS-TV1JD153FY Resistor, 15k 1/16W Metal Oxide R776 VRS-TV1JD102JY Resistor, 1k 1/16W Metal Oxide...

  • Page 148: Duntkd606Fmv0 (Operation Unit)

    LC-26SA1E/RU, LC-32SA1E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [4] DUNTKD605FM10/FM11 (POWER Unit) (LC-26SA1E/RU, LC-32SA1E/RU) LX-BZA165WJZZ Screw, x2 (for Inlet) [5] DUNTKD606FMV0 (OPERATION Unit) D151 RH-EX0641GEZZY Zener Diode, MTZJT-7212C P153 QPLGNA057WJZZ Plug, 3Pin(KM) R151 VRD-RA2BE182JY Resistor, 1.8k 1/8W Carbon...

  • Page 149: Duntkd890Fm12/Fm13

    LC-26SA1E/RU, LC-32SA1E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [7] DUNTKD608FM06/FM07 (TUNER Unit) (LC-26SA1E/RU, LC-32SA1E/RU) L201 VPCNN1R2JR58NY Coil, Peaking 1.2µH L202 VPCNN1R2JR58NY Coil, Peaking 1.2µH L203 VP-MK100J0000+ Coil, Peaking 10µH L204 VP-MK120J0000+ Coil, Peaking 12µH L205 VPCNN330J4R2NY Coil, Peaking 33µH...

  • Page 150: Lc-26Sa1E/Ru, Lc-32Sa1E/Ru

    LC-26SA1E/RU, LC-32SA1E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [8] DUNTKD890FM12/FM13 (MAIN Unit) (LC-26SA1E/RU, LC-32SA1E/RU) C1738 RC-KZA073WJZZY Capacitor, 10 16V Ceramic C1739 VCKYCY1EF104ZY Capacitor, 0.1 25V Ceramic C1740 VCKYCY1EF104ZY Capacitor, 0.1 25V Ceramic C1741 VCKYCY1EF104ZY Capacitor, 0.1 25V Ceramic...
  • Page 151 LC-26SA1E/RU, LC-32SA1E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [8] DUNTKD890FM12/FM13 (MAIN Unit) (LC-26SA1E/RU, LC-32SA1E/RU) C3001 VCKYCY1EF104ZY Capacitor, 0.1 25V Ceramic C3002 RC-KZA073WJZZY Capacitor, 10 16V Ceramic C3003 VCKYCY1EF104ZY Capacitor, 0.1 25V Ceramic C3004 RC-KZA073WJZZY Capacitor, 10 16V Ceramic...
  • Page 152 LC-26SA1E/RU, LC-32SA1E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [8] DUNTKD890FM12/FM13 (MAIN Unit) (LC-26SA1E/RU, LC-32SA1E/RU) FB2306 RBLN-A068WJZZY Balun, BLN-A068WJ FB2307 RBLN-A068WJZZY Balun, BLN-A068WJ FB2308 RBLN-A068WJZZY Balun, BLN-A068WJ FB2309 RBLN-A068WJZZY Balun, BLN-A068WJ FB2310 RBLN-A215WJZZY Balun, BLN-A215WJ FB2701 RBLN-A192WJZZY Balun, BLN-A192WJ...
  • Page 153 LC-26SA1E/RU, LC-32SA1E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [8] DUNTKD890FM12/FM13 (MAIN Unit) (LC-26SA1E/RU, LC-32SA1E/RU) P2303 QPLGNA344WJZZY Plug, 10Pin(RA) P2305 QPLGNA493WJZZY Plug, 32Pin(LV) P2306 QPLGN0565FJZZY Plug, 3Pin Q1701 VS2SC3928AR-1Y Transistor, 2SC3928A-T112-1R Q1702 VS2SA1530ARS1Y Transistor, 2SA1530A-T112-1R Q1703 VS2SC3928AR-1Y Transistor, 2SC3928A-T112-1R...
  • Page 154 LC-26SA1E/RU, LC-32SA1E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [8] DUNTKD890FM12/FM13 (MAIN Unit) (LC-26SA1E/RU, LC-32SA1E/RU) R1919 VRS-CY1JF100JY Resistor, 10 1/16W Metal Oxide R1920 VRS-CH1JF100JY Resistor, 10 1/16W Metal Oxide R1921 VRS-CH1JF100JY Resistor, 10 1/16W Metal Oxide R1922 VRS-CH1JF100JY Resistor, 10 1/16W Metal Oxide...
  • Page 155 LC-26SA1E/RU, LC-32SA1E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [8] DUNTKD890FM12/FM13 (MAIN Unit) (LC-26SA1E/RU, LC-32SA1E/RU) SC2704 QCNCWA251WJZZY Connector, 23Pin SC2705 QCNCWA010WJZZY Connector, 15Pin TH3002 VHHM1103J03-1Y Thermistor X1901 RCRSCA108WJZZY Crystal, 28.322MHz X3001 RCRSC0012CEZZY Crystal, 20.25MHz PSLDMA974WJFW Main Shield New...

  • Page 156: Cabinet Parts (Lc-26Sa1E/F/I/K/Ru)

    LC-26SA1E/RU, LC-32SA1E/RU [9] CABINET PARTS (LC-26SA1E/F/I/K/RU) 4-2-2 4-2-3 4-2-1 4-2-3 4-1-1 4-1-2 4-1-4 4-1-3 4-1-3 4-1-4 4-1-4 4-1-3 4-1-5 4-1-5...
  • Page 157 LC-26SA1E/RU, LC-32SA1E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [9] CABINET PARTS (LC-26SA1E/F/I/K/RU) CCABAB517WJ01 Front Cabinet Ass'y Not Available Front Cabinet GCOVAB810WJSA LED Cover HBDGBA056WJSA SHARP Badge PSPAHA890WJZZ Mask Spacer (Side), x2 PSPAHA891WJZZ Mask Spacer (T-B), x2 PSPAZB212WJZZ Speaker Cusion, x2...

  • Page 158: Cabinet Parts (Lc-32Sa1E/F/I/K/Ru)

    LC-26SA1E/RU, LC-32SA1E/RU [10] CABINET PARTS (LC-32SA1E/F/I/K/RU) 4-2-2 4-2-3 4-2-1 4-2-3 4-1-1 4-1-2 4-1-4 4-1-3 4-1-3 4-1-4 4-1-4 4-1-3 4-1-5 4-1-5...
  • Page 159 LC-26SA1E/RU, LC-32SA1E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [10] CABINET PARTS (LC-32SA1E/F/I/K/RU) CCABAB521WJ01 Front Cabinet Ass'y Not Available Front Cabinet GCOVAB810WJSA LED Cover HBDGBA056WJSA SHARP Badge PSPAHA894WJZZ Mask Spacer (Side), x2 PSPAHA895WJZZ Mask Spacer (T-B), x2 PSPAZB212WJZZ Speaker Cusion, x2...

  • Page 160: Supplied Accessories

    LC-26SA1E/RU, LC-32SA1E/RU [11] SUPPLIED ACCESSORIES PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [11] SUPPLIED ACCESSORIES RRMCGA531WJSA Remote Control Unit QACCKA021WJPZ AC Cord for EUROPE without U.K. QACCBA073WJPZ AC Cord for U.K. QCNWGA075WJPZ 3 RCA to 15-pin D-sub Adaptor LHLDWA083WJ00...

  • Page 161: Packing Parts

    LC-26SA1E/RU, LC-32SA1E/RU [12] PACKING PARTS...

  • Page 162: Service Jigs

    LC-26SA1E/RU, LC-32SA1E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [12] PACKING PARTS SPAKCC854WJZZ Packing Case (LC-26SA1E/F/I/K) SPAKCC862WJZZ Packing Case (LC-32SA1E/F/I/K) SPAKCC932WJZZ Packing Case (LC-26SA1RU) SPAKCC934WJZZ Packing Case (LC-32SA1RU) SPAKXB212WJZZ Buffer Material (LC-26SA1E/F/I/K/RU) SPAKXB221WJZZ Buffer Material (LC-32SA1E/F/I/K/RU) SPAKPA732WJZZ Wrapping Paper (LC-26SA1E/F/I/K/RU)
  • Page 163 LC-26SA1E/RU, LC-32SA1E/RU...
  • Page 164 LC-26SA1E/RU, LC-32SA1E/RU COPYRIGHT © 2005 BY SHARP CORPORATION 2006 ALL RIGHTS RESERVED. No Part of this publication may be reproduced, stored in a retrieval system, or transmitted in any from or by any means, electronic, mechanical, photocopying , recording, or otherwise, without prior written permission of the publisher.

This manual is also suitable for:

Lc-32sa1e

Table of Contents