Panasonic CF-73 Series Reference Manual page 94

Modem
Connecting the Internal Modem with a Telephone Jack
Ring Resume Function
CAUTION
Do not use the PBX internal phone lines installed in company offices. Doing so may
lead to a fire or electric shock.
It is not possible to connect the modem to any of the following lines.
• Internal home phones
• Intercoms
Be sure to connect the modem telephone cable into the modem port, not into the LAN
port.
1
Connect the computer and the telephone jack (A) using a modem
telephone cable (included)(B).
Open the modem cover, position the cable so that the tab (C) matches the port
and insert the cable until you hear a "click".
2
Change the settings as necessary.
A
Select [Edit] in [start] - [Control Panel] - [Printers and Other Hardware] -
[Phone and Modem Options] - [Dialing Rules], then select the location from
which you will be dialing in [Country/region].
B Input the necessary information (items such as the area code, dialing rules,
etc.), select [OK], then select [OK].
NOTE
Do not enter either the standby or hibernation mode during communications.
To remove the cable, pull out while pressing down on the tab.
With this function, if the telephone that is connected to the modem rings in the standby mode,
the power of the computer automatically switches ON.
This function is convenient when using automatic information receiving applications such as
a FAX application.
94
,