Using the Tire Sealant and Compressor
Kit without Sealant to Inflate an
Underinflated Tire (Not Punctured)
To use the air compressor to inflate a tire with air only
and not sealant:
1. Unlock the air only hose (F) from the sealant
canister (B) by pulling up on the lever.
2. Pull the air only hose (F) from the sealant
canister (B).
3. Remove the tire valve stem cap from the flat tire by
turning it counterclockwise.
5-38
4. Push the air only hose (F) onto the tire valve stem
and push the lever down to secure in place.
5. Remove the air compressor accessory plug (C)
from the unit.
6. Plug the air compressor accessory plug (C) into an
accessory power outlet in the vehicle. See
"Accessory Power Outlet" in the owner manual.
Do not slam the door or close the window on the
compressor accessory plug cord.
CAUTION:
{
Idling the engine in a closed-in place or with
the climate control system off can cause
deadly carbon monoxide (CO). See "Engine
Exhaust" in the owner manual.
7. Start the vehicle. See Starting Your Vehicle on
page 2-3. The vehicle must be running while
using the air compressor.