Consumer Information; Instrument And Control Functions; Meter & Indicator - KEEWAY 2015 RKS 125-26 User Manual

CONSUMER INFORMATION

● The vehicle identifi-
cation number ① is
stamped on the right
side steering head
1
tube.
● The engine serial
number ② is stamped
on the lower left of the
Vehicle identification number
crankcase.
( VIN )
TIP
The vehicle identifi-
2
c a t i o n n u m b e r o r
t h e e n g i n e s e r i a l
number are used to
engine serial number
r e g i s t e r t h e ve h i -
cle,they are also to
VIN No.
assist your dealer in
t e r m s of o rd e r ing
ENGINE No.
parts or referring to
s p e c i a l s e r v i c e
information
INSTRUMENT AND CONTROL
FUNCTIONS
Key Switch
" " （Off） position:
All the circuits are off.
" " （On） position:
The circuits are on.
The Steering Lock
It is set at the lower right
side of the head tube.
When using it, steer the
handle to the left, and insert
the ignition key into the
steering lock and turn it
clockwise.
NOTICE
Do not turn your key to lock the vehicle while
driving which is not necessary and is also apt to
cause accident.
Press the key in a proper force.
Meter & Indicator
1
2
3
4
1. Gear Indicator Lamp
Numbers on the meter indicate the
gear position of the vehicle.
2. Neutral Indicator Lamp
When the transmission is shifted to neutral
position, the indicator is on.
3. High Beam Indicator Lamp
When the high beam lamp of the headlamp turns on,
the high beam indicator lamp would be on.
4. Tachometer
It indicates the revolving speed of the engine.
5. Speedometer
Speedometer shows the running speed.
6. Odometer & trip meter:
Relative mileage (TRIP): it records the mileage the vehi-
cle covers in a period of time.
Odometer (TOTAL): it records the total mileage the vehi-
cle has covered in km.
7. Adjust button
5 6
7
8
9
10
11
Short press the button to
switch between km/h and mph.Long press the button to
reset the "Trip" mileage.
8. Fuel Level Indicator：
It indicates the fuel level in the fuel tank.
9. Turning Indicator
The lamps would flash with the turning signals.
10. Clock
It shows the time.
11. Select button
Short press the button to switch between trip and odom-
eter functions on the meter.
Press button "SELECT" for several seconds, there will
appear the interface for time adjustment:
"SELECT" for selection of digits of time display and
"ADJUST" for adjustment of each value.
7 - 8