Usb Storage Devices; Auto Standby; Apply Factory Settings; Update Software - Philips HTL1180B User Manual

USB storage devices

Enjoy audio on a USB storage device, such as an
MP3 player and USB flash memory, etc.
What you need
• A USB storage device that is formatted for
FAT or NTFS file systems, and complies
with the Mass Storage Class.
• An MP3 file on a USB storage device
1
Connect a USB storage device to the
SoundBar.
2
Press USB on the remote control.
3
Use the remote control to control play.
Button Action
Start or pause or resume play.
/ Skip to the previous or next track.
REPEAT
During play, press to toggle: repeat
all tracks and repeat off.
Repeat play indicator
• If repeat mode is turned on, all
the LED indicators blink for three
times, then the current source
indicator stays on.
• If repeat mode is turned off, all
the LED indicators light up, then
light off one by one. Finally the
current source indicator stays on.
Note
•
This product may not be compatible with certain types
of USB storage device.
•
If you use a USB extension cable, USB HUB, or USB
multi-reader, the USB storage device may not be
recognized.
•
Digital camera PTP and MTP protocols are not supported.
•
Do not remove the USB storage device while it is
being read.
•
DRM-protected music files (MP3) are not supported.
•
Support a USB port: 5V
HTL1180B_79_UM_EN.indd 9
, 1A.

Auto standby

When playing media from a connected device,
this product automatically switches to standby
after 15 minutes of button inactivity and no
audio play from a connected device.

Apply factory settings

You can reset your SoundBar to the default
setting mode.
1
In mute mode, quickly press AUX two
times.
» The factory settings is restored.

Update software

To continually improve the product, software
upgrade may be offered. Visit ww.philips.com/
support to check if the latest software version
is available.
EN
9
4/27/2015 11:14:52 AM