Linksys LAPAC1750 User Manual page 62

Captive Portal
Authentication
Timeout
Additional HTTP
Port
HTTP Port
Additional HTTPS
Port
HTTPS Port
Portal Profiles
Go to Configuration > Captive Portal > Portal Profiles to define detailed settings for Captive
Portal profile. Create up to two profiles.
Enable or Disable Captive Portal function globally.
Captive Portal is disabled by default.
The number of seconds the access point keeps an
authentication session open with a wireless client. If
the client fails to enter authentication credentials
within the timeout period, the client may need to
refresh the web authentication page.
The range is from 60 to 600 seconds. Default is 300.
HTTP portal authentication uses the HTTP
management port by default. You can configure an
additional port for that process.
Once Additional HTTP Port is enabled, define an
additional port for HTTP protocol. The value can be
80 or 1024 to 65535 and is 80 by default. The HTTP
Port must be different from the HTTP port in
Administration > Management Access
HTTPS portal authentication uses the HTTPS
management port by default. You can configure an
additional port for that process.
Once Additional HTTPS Port is enabled, define an
additional port for HTTPS protocol. The value can be
443 or 1024 to 65535 and is 443 by default. The
additional HTTPS Port must be different from the
Administration > Management Access
HTTPS port in
page.
page.
62