Samsung TXT3093WHX Service Manual page 125

Part Name
Chassis
① Separate the cables connecting the FBT and the CRT.
Holder
: Since there may be a remaining high-voltage current within
the CRT, take care not to touch the CRT hole with metal or a
part of yourself when separating the cables.
12-1-3 Disassembling the CRT Ass'y
Part Name
CRT
① Separate the cables from the Deflection/System Board and
Ass'y
CRT Ass'y.
① Separate the wires from the FBT of the Deflection Board and
the CRT Ass'y.
② To separate the thick red and white wires, pull the wires while
pressing the push-type clip at the connector.
③ To separate the thin red wire, insert a pin in the small hold
next to the hole and pull the wire.
: Take care when separating the wires because pulling the
wires by force may damage the socket. In addition, separate the
wires on a flat and clean surface so as to prevent scratching of
the material and the PCB.
Samsung Electronics
Description
Description
Disassembly & Reassembly
Description Photo
Description Photo
Pull the wires while
pressing on the fixing clip.
12-3