Optional Accessories; Model Variations; System Components - Shure UA844 User Manual

General
The Shure Model UA844+ is an antenna distribution system that allows
for the expansion of wireless microphone systems by splitting one pair of
antennas to multiple receivers. It also amplifies RF signals to compensate
for insertion loss that results from splitting signal power to multiple outputs.
A single UA844+ system can support up to five wireless receivers. A maxi-
mum of five UA844+ systems may be used in a two-tiered configuration.

Model Variations

UA844+ Model Variations
UA844+V 174-216 MHz
UA844+SWB 470-960 MHz
UA844+Z16 1240-1260 MHz
UA844+Z17 1492-1525 MHz
UA844+Z18 1785-1805 MHz
Note: Some units include a power switch on the front panel to meet re-
gional regulations.

System Components

• Front-mounting antenna hardware
• Rack-mounting hardware
• External power supply
• (2) 6 ft. BNC cables
• (4) Non-locking DC power cords (QLXD4, SLX4, BLX4R)
• (10) 22 in. BNC cables*
• (4) Locking DC power cords** (ULXD4)
*Model UA844SWB/LC substitutes (2) 22 in. BNC cables.
**Not included with Model UA844SWB/LC

Optional Accessories

1/2 Wave Omnidirectional Receiver Antenna for
improved wireless signal reception
In-Line RF Amplifier compensates for signal loss
over extended cable runs
UA874 Active Directional Antenna for improved
wireless signal reception with greater rejection of
1/2 Wave Antenna Remote Mount Kit UA505
Antenna Rack Panel with Cables and BNC
Note: Be sure to select antennas and accessories that are compatible
with the operating frequency range of your wireless system. Contact Shure
or your local retailer for help with selecting the right wireless accessories.
Antenna Cables from Shure
Shure offers pre-terminated antenna cables ranging from 6 to 100 feet.
Be sure to select the low-loss "Z" models (available for longer cables)
when using frequency bands above 1000 MHz.
9
UA8
UA834
UA874
unwanted signals
UA440
Adapters